KYODO INTERNATIONAL INC./Japan

Japanese
Contact Us
  1. KYODO INTERNATIONAL INC./Japan
  2. News & Press

List of News << All Categories All year >>

Apr 6.2017 
We shall exhibit at "MEDTEC Japan 2017"
We shall exhibit at "MEDTEC Japan 2017" which will be held at Tokyo Big Sight during 19th (Wed) to 21st (Fri) of April, 2017.
We shall exhibit our micro fabrication technologies and Biotechnology/ MEMS related service and products based on thin film deposition, photolithography, etching, and nanoimprinting.

Details are follows

 [Ditails]
Date 19th-21st of April, 2017
Venue Tokyo Big Sight
Booth No 3105

 [Contents]
Thin film deposition and nano/micro structure fabrication services

--- For Medical Care/Nursing/Material/Chemical/Electronics ---
  • Thin film Deposition Service with over 120 different
  •  materials(SiO2, Ag, TiO2, Ti, Au etc. )for various functions such as antibacterial, deodorization, hardness enhancement, durability enhancement, corrosion protection etc.
  • Patterning fabrication on the flat surface and the three dimensional structure with original nanoimprinting tool for antibacterial, sense of touch, micro channel, super water repellent structure etc.
Manufacturing services for micro machining parts (MEMS) in medical equipment and tools

We offer optimal solution for volume manufacturing in MEMS.

--- Examples of Manufacturing MEMS devices
for medical application ---
  • MEMS Vibration Harvester(Application example:Oscillator for leadless pace maker)
  • Micro needle(Application example:Medical patch)
  • MEMS pressure sensor(Application:Pressure sensor for blood pressure measurement)
IoT total solution
We offer to integrate and consult service for whole IoT components from sensor devices/ network/ data base/ user interface such in healthcare, home healthcare etc.

CEP3D II –Cellar Environment Plate for 3D cell culture
This plate adapting microfluidic technology can be used for iPS and ES cells differentiation induction It save the amount of medium and other additives like hormone or cytokine for cell culture and achieve efficient 3D stem cell culture.

Organ-On-A-Chip
Organ-on-a Chip is a microfluidic cell culture device inhabited by living cells arranged to simulate tissue- and organ- level physiology. These devices produce levels of tissue and organ functionality not possible with 2D or 3D culture systems. This technology has great potential to advance the study of tissue development, organ physiology and disease etiology.

If you intend to visit the event, do not hesitate to stop by our booth.

Apr 6.2017 
We shall exhibit at "MEDTEC Japan 2017"
We shall exhibit at "MEDTEC Japan 2017" which will be held at Tokyo Big Sight during 19th (Wed) to 21st (Fri) of April, 2017.
We shall exhibit our micro fabrication technologies and Biotechnology/ MEMS related service and products based on thin film deposition, photolithography, etching, and nanoimprinting.

Details are follows

 [Ditails]
Date 19th-21st of April, 2017
Venue Tokyo Big Sight
Booth No 3105

 [Contents]
Thin film deposition and nano/micro structure fabrication services

--- For Medical Care/Nursing/Material/Chemical/Electronics ---
  • Thin film Deposition Service with over 120 different
  •  materials(SiO2, Ag, TiO2, Ti, Au etc. )for various functions such as antibacterial, deodorization, hardness enhancement, durability enhancement, corrosion protection etc.
  • Patterning fabrication on the flat surface and the three dimensional structure with original nanoimprinting tool for antibacterial, sense of touch, micro channel, super water repellent structure etc.
Manufacturing services for micro machining parts (MEMS) in medical equipment and tools

We offer optimal solution for volume manufacturing in MEMS.

--- Examples of Manufacturing MEMS devices
for medical application ---
  • MEMS Vibration Harvester(Application example:Oscillator for leadless pace maker)
  • Micro needle(Application example:Medical patch)
  • MEMS pressure sensor(Application:Pressure sensor for blood pressure measurement)
IoT total solution
We offer to integrate and consult service for whole IoT components from sensor devices/ network/ data base/ user interface such in healthcare, home healthcare etc.

CEP3D II –Cellar Environment Plate for 3D cell culture
This plate adapting microfluidic technology can be used for iPS and ES cells differentiation induction It save the amount of medium and other additives like hormone or cytokine for cell culture and achieve efficient 3D stem cell culture.

Organ-On-A-Chip
Organ-on-a Chip is a microfluidic cell culture device inhabited by living cells arranged to simulate tissue- and organ- level physiology. These devices produce levels of tissue and organ functionality not possible with 2D or 3D culture systems. This technology has great potential to advance the study of tissue development, organ physiology and disease etiology.

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 15.2017 
We will exhibit at “The 91 st Annual Meeting of the Japanese Association for Infectious Diseases”
We will exhibit at “The 91 st Annual Meeting of the Japanese Association for Infectious Diseases”, which will be held from 6th to 8th April.

Details are as follows.

 [Details]
Date 6th-8th of April
Venue Keio Plaza Hotel Tokyo
Booth No 11

 [Contents]
OMNIgene®・ORAL
  • Collecting a bacteria / viral DNA (RNA) contained in oral specimens (saliva, plaque, tongue) and store at room temperature.
  • Application: Metagenome analysis, PCR-PFLR, RT-qPCR, etc.
[NEW]OMNIgene®・VAGINAL

  • Collecting a vaginal flora (bacteria / virus) DNA and RNA and store at room temperature.
  • Application: PCR, RT-qPCR, microarray, NGS, etc.

OMNIgene®・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/ stool for gut microbiome profiling.

Please visit our booth(No.11).

Feb 2.2017 
The Chinese Website about Nanoimprinting PSS volume production system “TEX Series”
We are pleased to announce that we now have the Chinese Website about Nanoimprinting PSS volume production system “TEX Series”.
The Chinese Website Page consists of many contents, including technical and cost advantage with the comparison to conventional lithography, technical data, specification of imprinting tool and so on.

URL : http://nanopss.com/cn/

Jan 18.2017 
We shall exhibit at "FOODEX JAPAN 2017 - The 42nd International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2017 - The 42nd International Food and Beverage Exhibition", which will be held between the 7th -10th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details
To FOODEX2017 official web site

If you intend to visit the event, do not hesitate to stop by our boo

Dec 28.2016 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.29.2016 - Jan.3.2017

We shall resume the operation from the 4th of January, 2017.
For inquiries we will receive via our website during the period, you will retrieve reply after the 4th of January.
We appreciate for your understanding.

We wish you all happy holidays and are looking forward to working with you in 2017!


Dec 26.2016 
We shall exhibit at “ 3rd WEARABLE EXPO"
We shall exhibit at "3rd WEARABLE EXPO - Wearable Device & Technology Expo" which will be held at Tokyo Big Sight during 18th(Wed) to 20th(Fri) of January, 2017.

Details are as follows.


 [Dertails]
Date January 18 [Wed] - 20 [Fri], 2017
Venue Tokyo Big Sight
Booth West Hall No.W22-20

 [Contents]
[ Manufacturing MEMS sensor ]
  • We offer from prototyping to volume production timely in various kinds of MEMS sensors which is required for wearable devices. (Accelerator Sensor, Pressure Sensor etc.) 

[ Introduction of peculiar technologies ]
  • Sputtering thin film deposition
    - Realizing high insulation characteristics as CVD deposition by sputtering method
      (Suitable for insulation layer deposition on film substrates)
    - Realizing ITO layer resistant value of 30Ω/□ by normal temperature deposition 
  • Photolithography /Pattering
    - High precision μm patterning process on film substrate
    - Patterning process by Ink-jet method
  • Nanoimprint total solution
    - High functionality by nanoimprinting on films
  • PZT devise for Energy harvest
    - MEMS vibration harvester for Leadless pace maker
    (Silex Microsystems社 European smart-MEMPHIS H2000 program)
[ IoT total coordination ]
Development for innovative products and services for our life an environment have been progressing by the spread of IoT technology. It must be required knowledge of technology and project management for IoT which is composed of device design, device manufacture, network, security, data process. We offer total coordination/integration in each component of IoT with our technical knowledge and experiences
  • Example of IoT Devices
    - Wearable device for biological information monitor in animal husbandry "Intelligent nose ring"
    - IoT system construction "Start-up Kit"

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 17.2016 
We shall exhibit at “SEMICON Japan 2016”
We shall exhibit at "SEMICON Japan 2016" which will be held at Tokyo Big Sight during 14th(Wed) to 16th(Fri) of December, 2016.

Details are as follows.

 [Details]
Day & Time 14th (Wed.) to 16th(Fri.) of December, 2016 10:00−17:00
Venue Tokyo Big Sight
Booth NO 5220 (Hall5), 3707 (Hall3)

 [Contents]
Front end Exhibit Zone:5220 (Hall5)
・We offer foundry services such as thin film deposition, etching and CMP and introduce our newest development.
・We offer maintenance services including repair, cleaning and bonding process services for consumable and discontinue parts in semiconductor manufacturing equipment.
[ Foundry services for front end process ]
  • Thin film deposition process:Sputtering、CVD、ALD、PLD、Electro forming
  • Photolithography・Etching
  • CMP/BG/Bonding:Planarization/Back Gginding/Various Bonding
[ New technologies ]
  • Customized membranes
  • Thin film thermocouples
  • Sputtering deposition for functional powder
  • Magnetic nanoimprinting
[ Various Microfabrication Tool ]
  • Multi-purpose spin processor “POLOS”
  • Nano-pattern lithography system “PhableR 100” etc. 
[ Consumable Parts and Maintenance parts for Semiconductor manufacturing Equipment ]
  • Discontinuing tool parts repair, maintenance and overhaul
  • High Functional Parts for CMP Process
  • No damage cleaning technology “Dry Ice Blast Cleaning”
  • Optimum cleaning method from combination of chemical and sand breasting
[ Bonding services (Metal・Resin bonding) ]
  • Cylindrical target bonding, Cryo panel, ESC  etc.
World of IoT Zone:3707 (Hall3)
Development for innovative products and services for our life an environment have been progressing by the spread of IoT technology. It must be required knowledge of technology and project management for IoT which is composed of device design, device manufacture, network, security, data process.
We offer total coordination/integration in each component of IoT with our technical knowledge and experiences
[ IoT Devices ]
  • Wearable device for biological information monitor in animal husbandry ”Intelligent nose ring”
  • IoT system construction “Start-up Kit” IoT
[ Application of processing technologies ]
  • High resolution process by nanoimprint technology : Enlarge surface area in fuel cell and enhancing optical feature in solar battery
  • Thin film deposition on flexible film : Human sensor ・Wearable devices etc.
  • MEMS device development and fabrication by dedicated MEMS processing technology : Energy harvest by Piezo electric devices

If you intend to visit the event, do not hesitate to stop by our booth.

Oct 5.2016 
We shall exhibit JDDW2016 “Japan Digestive Disease Week 2016”
We shall exhibit JDDW2016 “Japan Digestive Disease Week 2016” at Kobe Convention Center.

Details are follows.

 [Details]
会期 3rd-5th November
Venue Kobe International Exhibition Hall , No.1 Building 1st floor
Booth No 13

 [Contents]
Microbial Collection and Stabiization kit OMNIgene GUT
OMNIgene GUT is an all in one system for the easy self-collection and stabilization of microbial DNA from feces/stool for gut microbiome profiling.
Canadian supplier, DNAGenotek, will also attend the exhibition.

If you intend to visit the event, do not hesitate to stop by our booth.

Sep 6.2016 
We shall exhibit “The 89th Annual meeting of the Japanese Biochemical Society” .
We shall exhibit “The 89th Annual meeting of the Japanese Biochemical Society” at Sendai International Center.

Details are follows

 [Details]
Date 25th-27th of September
Venue Sendai International Center
Booth No 6

 [Contents]
DNA/RNA Self Collection Kit
We will exhibit products that optimize ease of collection and provide superior samples and proven performance for nucleic acid testing from various biological samples like saliva, feces, gum, tongue etc. High-quality samples that are easily collected from target populations enable our customers to focus on translating their analysis and testing into significant worldwide advancements in health and science.

Oxygen controller
The oxygen controller create hyperoxia – hypoxia environment (0.1~99.9%) in chamber or incubator. It can be used for not only cell culture but also animal or plant experiment.

Others
We also introduce 3D bio-printers, Liquid nitrogen free controlled rate freezer and high pressure chamber.

If you intend to visit the event, do not hesitate to stop by our booth.

Aug 17.2016 
We shall exhibit at “JASIS2016”
We shall exhibit at “JASIS2016”, which will be held between the 7th -9th of September. We will also give a presentation of our product in Life science innovation zone on 9th September.

Details are follows

 [Details]
Date 7th(Wed.) - 9th(Fri.) of September, 2016
Venue Makuhari Messe, Hall 8
Booth No AB-19 (Life Science Innovation Zone)

 [Contents]
DNACollection Kit “OrageneDNA”
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures. The DNA collected is high quality and quantity allowing for use in most downstream applications.


[NEW] Microbial Collection and Stabilization Kits OMNIgeneOral For gum, plaque and tongue microbiome
  • A collection kit for the mouth Flora DNA / RNA from the gums or tongue. After collecting the samples can store at room temperature.
  • It can qualitative analysis in order to keep the bacterial flora of the time of collection in a stable manner  



[NEW] NANORULERS 
  • New standard tool which is a fluorescent dye immobilized on glass slides
  • Easy resolution evaluation of super-resolution microscope, fast, can be carried out accurately.
---- Presentation ---- 

"Grasp the key to the genome research and business success."

Date and time: 9th September(Fri) 13:0013:25
Room: Life science diagnostics innovation zone

*No need advance application


Please visit our booth(AB-19 in Life science innovation zone.)

Aug 16.2016 
We shall exhibit "MEMS SENSING & NETWORK SYSTEM 2016"
We shall exhibit at "MEMS SENSING & NETWORKING SYSTEM 2016" which will be held at Pacifico Yokohama 14th (Wed) to 16th (Fri) of September, 2016.

Details are follows

 [Outline]
Date & Time September. 14th [Wed] - 16th[Fri], 2016 10:00-17:00
Venue Pacifico Yokohama
Booth NO G-6

 [Contents]
MEMS Volume Production Foundry /Joint Exhibition:Silex microsystems (Sweden)
  • World No.1 Pure Play MEMS Foundry dedicated for OEM
  • Designated for MEMS Φ6“/ the latest φ8”volume production fab
  • Original TSV technology "Sil-Via" "Met-Via" "Met-Cap"
  • Original TGV technology for thinning MEMS device
  • Launch of the manufacturing service in Semi-Custom Pressure Sensor ‘RocketMEMS’
  • Establishment of PZT layer deposition by Sol-Gel method
  • Mass Production of Micro Needle for Bio/ Medical application
MEMS Prototyping Solution
We offer optimal process for your MEMS development and fabrication requests using our decades-long expertise and several fabrication processes.

[ Process Example ]
  • Thin Film Deposition(Sputter、Evaporation、CVD、Electro Plating、ALD etc.)
  • Photolithography(Aligner、Stepper、EB etc.)
  • Etching(Wet、Dry、Si Deep RIE(ICP)、Sand Blast etc.)
  • CMP(Planarization for thin layers and post-bonding etc.)
  • Wafer Bonding(Room-temp bonding、Plasma bonding、Anodic bonding、Eutectic bonding etc. )
  • Ion Implant
  • Annealing(Laser annealing、RTA、Thermal diffusion etc.)
  • Nanoimprint(Mold fabrication、Nanoimprinting services、Anti-sticking mold treatment、Technology consulting
Microfabrication Equipment
  • R&D Nano-meter-level exposure system "PhableR 100"
  • “UV Nanoimprinting tool” for R&D application with low cost and easy to use design.
  • All plastic versatile Spin processor “SPIN150i” capable for all spin process such as coating, etching, developing, cleaning and spin dry with chemical inert.  
  • Mask Aligner, equipped with high quality UV Light Source and Exposure System by OAI who have an abundance of expertise in UV light source development, realizes for optimal Mask Aligner from R&D to production stage.

If you intend to visit the event, do not hesitate to stop by our booth.

Jun 24.2016 
We shall exhibit at "TECHNO-TRANSFER in KAWASAKI 2016"
We shall exhibit at "TECHNO-TRANSFER in KAWASAKI 2016" on Wednesday 7/6 to 7/8 in Kanagawa Science Park (KSP) Innovation center WEST building.

Details are follows.

 [Details]
Date 6th to 8th of July, 2016
Venue Kanagawa Science Park (KSP) Innovation center WEST building.
Booth No 3F-34

 [Content]
The device blasts grained dry ice particles from a nozzle against a target by highly compressed air.
We exhibit “ SUPERBLAST Reborn”
  • Removal of resinous affix (sticking substances and oils)
  • Metal Molding (injection mold etc.)
  • Removal of burnt for food use hot plate
  • Removal for any kinds of paintings
  • Sterilization of medical and nursing care product
  • Cleaning for machine parts or jigs
  • Removal of burr                    etc. applied for various applications and uses!!
We offer Manufacturing・Sales・Cleaning Services・Rental of Dry Ice Blast Cleaning

We are looking forward to seeing you at our stand.

May 17.2016 
We shall exhibit at "BIOMASS EXPO 2016"
We shall exhibit at "BIOMASS EXPO 2016" on Wednesday 6/15 to Friday 6/17 at East
Hall, Tokyo Big Sight.

Details are follows

 [Details]
Date 15th-17th of June, 2016
Venue Tokyo Big Sight
Booth No Bio - 46

 [Contents]
  • PERMASTORE Glass lining tanks (Methane digesters, Sludge tanks, Wastewater tanks)
  • Submersible mixers and pumps
  • Double and single membrane gasholders
  • Gas flares -Hexa floating covers

We are looking forward to seeing you at our stand.

Apr 27.2016 
We shall exhibit at “The 63rd Annual Meeting of Japanese Association for Animal Science”.
We shall exhibit at "The 63rd Annual Meeting of Japanese Association for Animal Science" which will be held at MUZA KAWASAKI SYMPHONY HALL during 18th (Wed) to 20th (Fri) of May, 2016.

Details are follows

 [Details]
Date 18th-20th of May, 2016
Venue MUZA KAWASAKI SYMPHONY HALL
1310 Omiya-cho, Saiwai-ku, 212-8557 Kawasaki-City
Booth No A-18

 [Contents]
Oxygen Controller ProOx110
We will introduce the oxygen controller that use at animal experiments. Oxygen controller can control low oxygen by the nitrogen gas supply and control high oxygen experiment by the oxygen gas supply.
Application example:Pulmonary hypertension model、Retinopathy of prematurity mode

OMNIgene・GUT
OMNIgeneGUT can be used in the intestinal environment inspection, after collection is in a stable manner keeping the specimens at room temperature.
It is easy to collect specimens, and to facilitate the specimen collected and at home collection of from afar.


PERFORMAGENE

Performagene can collect DNA from animals that dogs, horses and any other. It solely enables DNA collection from saliva and long-term preservation.

Please come and see us (booth#A-18).if you come to be the conference.

Apr 7.2016 
We shall exhibit in Test Kit Expo of “MEDTEC Japan 2016”
We shall exhibit at "MEDTEC Japan 2016" which will be held at Tokyo Big Sight during 20th (Wed) to 22th (Fri) of April, 2016.

Details are follows

 [Details]
Date 20th-22th of April, 2016
Venue Tokyo Big Sight
Booth No 800

 [Contents]
DNA self-collection kit Oragene - Human DNA from saliva -
  • This kit is for human DNA for collecting from saliva. It can store DNA at room temperature for a long time.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
  • Option compatible original packaging, barcoded
  • Those who are already service deployment, also those who are considering the future introduction in the new business please visit our booth
[ NEW ]DNA Collection kit OMNIgene GUT -Microbial DNA from feces-
It can be used in the intestinal environment inspection, after collection is in a stable manner keeping the specimens at room temperature. It is easy to collect specimens, and to facilitate the specimen collected and at home collection of from afar.  

Microfluidics Chip・μTAS
We introduce products and services of Microfluidics Chip and μTAS for analysis and diagnosis application. We offer not only manufacturing of chips and holders but from designing or fabrication to volume production of glass and polymer products.

-Application example of analysis & diagnosis for Microfluidics Chip and μTAS-
  • ”Droplet Generator” for biomedical research and development
  • “Flow-cell” for analysis system
  • “Micro reactor / Micro Mixer” for chemosynthesis
  • Peripheral for Pump / Chip Holder
Nano・micro fabrication
We offer nano-micro size processing services by taking advantage of our semiconductor equipment. We can respond to customer’s needs such as small number of fabrication of micro channel or mold for plastic injection for R&D purpose, by offering thin film coating achieved by our abundant 120 target materials (Ti, Co, Si, and Au) as with various patterning process.

-Application example of Thin-film・micro fabrication technology in medical・nursing industry-
  • Barrier (SiO2, SiN, etc.)
  • Antibacterial (Ag, Cu etc.)
  • Deodorization (TiO2 etc.)
  • Coloring for medical/nursing goods (Al, Au, Ti, etc.)
  • Surface roughness fabrication for rubber/plastic parts
  • Microfluidics Chip
MEMS volume production foundry
We introduce MEMS production foundry services for 8 inch silicon wafer. We can respond to customer’s needs for outsourcing of MEMS devices manufacturing in the phase of volume production.

-Example of MEMS device production for medical application-
  • Micro mirror array for medical equipment
  • Micro needle
  • Wearable device/equipment

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 23.2016 
DNA genotek will exhibit at “The 13th International Congress of Human Genetics”
DNA Genotek is coming to ICHG 2016!

Please visit Kyodo International and DNA Genotek at Booth 29 to learn about sample collection and stabilization products for human genetics, microbiology and infectious disease. Oragene.DNA kits collect and preserve DNA from saliva for years at room temperature. OMNIgene.GUT fecal kits offer easy self-collection and immediate stabilization of the gut microbiota profile.

Have your picture taken in "Canada" in our custom photobooth! 

 [Details]
Date 4th-6th of April.
Venue Kyoto International Conference Center
Booth No. 29

 [Contents]
Oragene®・DNA
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
[ NEW ] OMNIgene®・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/ stool for gut microbiome profiling.

Please visit their booth(No.29).

Mar 16.2016 
Silex Microsystems shall exhibit at "IEEE-NEMS 2016"
Silex Microsystems shall exhibit at "The 11th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2016) " which will be held at Matsushima Bay and Sendai MEMS City, Japan, 17-20 April, 2016.

Details are follows.

 [Details]
Date for exhibition 18(Mon.) -20(Wed.), 2016
Venue Taikanso, Matsushima

 [Contents]
MEMS foundry ’Silex Microsystems’
  • φ6",8"compatible MEMS foundry
  • Unique TSV technology
    1) Sil-Via : For better thermal resistivity and higher density by applying all Si structure
    2) Met-Via / Met-Cap : For better yield by applying Cu hollow structure
    3) For low power loss by Glass Via structure
  • Unique TGV technology : (for low power loss by Glass via structure)  
  • PZT production technology with sol-gel method
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 8.2016 
We shall exhibit "26th FINETECH Japan" at MEMS Technology Zone
We shall exhibit at "26th- FINETECH Japan" which will be held at Tokyo Big Sight during 6th (Wed) to 8th (Fri) of April, 2016.

Details are follows

 [Outline]
Date April. 6th [Wed] - 8th[Fri], 2016
Venue Tokyo Big Sight East Hall
Booth NO E43-15

 [Contents]
[ M E M S ]
MEMS Device Volume Production (MEMS Foundry)
  • Partnership with Silex microsystems
  • Pure-Play MEMS foundry without in house manufactured products
  • Equipped φ6” and φ8” production line dedicated for MEMS.
== Platform technology to realizing high yields ==
- TSV technology for high temperature and density with Sil-Via, all Si structure.
- TSV technology for high yield by Cu hollow construction with Met-Via/Met-Cap
- Established PZT thin film deposition with Sol-Gel method.

== "SmartBLOCK" to realize high cost-effectiveness ==
- SmartBLOCK uses proven process blocks extracted from working process libraries to integrate functionality into a single structure. Faster more cost-efficient development through modular standardization using SmartBLOCK will support customers for timely product release.

[ Nanoimprint ]
Total solution with mold fabrication -imprinting services -related material supply
  • Mold fabrication (Nano〜Micro order mold)
  • Imprint process services (Introducing imprinting services results over 1000 cases including large size imprinting)
  • Suitable material offer for imprinting condition
  • Seamless RtR mold for mass production
Application of Micro/Fine structure and technology consulting
  • Anti-Reflection structure (Solar cell, Display etc.)
  • Hydrophobic structure (Window, Packing material for liquid etc.)
  • Anti-fogging structure (Bio technology etc.)
  • Droplet catch structure (flow controlling products)
Nanoimprinting Product
  • Schale with cell culture chip
  • Sapphire glass with anti-reflection structure

If you intend to visit the event, do not hesitate to stop by our booth.

Feb 22.2016 
We shall exhibit at "FOODEX JAPAN 2016 - The 41th International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2016 - The 41th International Food and Beverage Exhibition", which will be held between the 8th -11th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details
To FOODEX2016 official web site

If you intend to visit the event, do not hesitate to stop by our booth!

Jan 8.2016 
We shall exhibit at "nano tech 2016"
We shall exhibit at "nano tech 2016 - The15th International Nanotechnology Exhibition & Conference" which will be held at Tokyo Big Sight during 27th (Wed) to 29th (Fri) of January, 2016.

Details are follows.

 [Details]
Date Jan.27(Wed.) -Jan.29(Fri.), 2016
Venue Tokyo Big Sight
Booth NO 4E25

 [Contents]
We realize High Added-Values in various growth fields such as IoT, Medical Care and Environment by Thin Film Technologies.

Saving Energy、Environmental Issue、Medical Treatment /Medical Care
[Application] Solar cell, Battery, Wearable, Sensor, Micro needle
  • Thin film deposition services:semiconductor / LCD, power device, protective film, material development etc.
  • Etching process services:Patterning /Etching process services、Dry / Wet etching
  • MEMS Total Support
    Design support from technological strategy -- design -- simulation
    Prototyping based on design such as prototyping -- pilot production --
    Capable for expansion to mass production

Functional Material, Biomimetic
[Application] Photo catalyst, Photonic crystal
  • Nanoimprint / Mold fabrication for soft lithography Trial mold for initial evaluation(Anti-reflection、Micro lens etc.)
  • Imprint services(Thermal /UV imprint、Injection molding)
  • Original anti-sticking treatment(Fine MoZt)
  • Mold cleaning services / Mold replication services

Life Sciences
[Application] DDS, Bio sensor
  • Micronit Microfluidics:Manufacturing glass-made microfluidic chips applied to micro and nano technologies. Provided with Basic experiment, Custom design, Microfluidic related equipments.

Microfabrication Equipment
  • SPS Europe:The versatile, all plastic single substrate spin processors specifically designed for applications for spin developing, spin etching, rinse / cleaning, spin drying with high resistivity for chemical and contamination.

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 25.2015 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.29.2015 - Jan.3.2016

We shall resume the operation from the 4th of January, 2016.
For inquiries we will receive via our website during the period, you will retrieve reply after the 4th of January.
We appreciate for your understanding.

We wish you all happy holidays and are looking forward to working with you in 2016!


Nov 24.2015 
We shall exhibit at "SEMICON Japan 2015"
We shall exhibit at "SEMICON Japan 2015" which will be held at Tokyo Big Sight during 16th(Wed) to 18th(Fri) of December, 2015.

Details are as follows.


 [Details]
Date & Time 16th (Wed.) to 18th(Fri.) of December, 2015 10:00−17:00
Venue Tokyo Big Sight
Booth No Hall 5/ 5120, Hall2 / 3608

 [Contents]
Hall 5 / 5210
We offer optimal solution for various issues such in thin film deposition, bonding & sputtering target and consumable parts for semiconductor manufacturing equipment which customers face in development to mass production stage.
"Thin film fabrication services"
  • Thin film deposition process
  • Sputtering、CVD、Vapor deposition
  • Photolithography, Etching
  • Contact aligner, Stepper, Electron beam lithography
  • Dry/Wet etching
  • Nanoimprinting total solution
  • Mold fabrication〜imprint services (From initial trial to mass production)
  • CMP/ Wafer bonding services
"Bonding process and sputtering target sales"
  • Bonding process for cylindrical target (AZO for touch panel, SC and Carbon for battery)
  • Specialized target for R&D purpose such as CZC for metal mesh application
"Consumable parts and maintenance parts for semiconductor manufacturing equipment"
  • High functional parts for CMP process (retainer ring, upgrade parts for wet cleaning equipment)
  • Repair services for Ion implantation process equipment
  • Sputtering/ Etching process Dual HDD Full compatible compact flash for FDD
Hall 3 / 3608
Development for innovative products and services for our life and environment have been progressing by the spread of IoT technology.We offer distinguishing processing technologies which is applicable for IoT related devices in "Environment・Energy" "Wearable・Medical"
"High resolution process by Nanoimprint technology"
  • Enlarge surface area in fuel sell
  • Increase efficiency of solar battery
"Thin film deposition by sputter process"
  • Inhibitory layer for metal allergy (Ti)
  • Optical catalysis layer(TiO2
"R t R thin film deposition"
  • Human sensor
  • Wearable devices
"MEMS device development and fabrication by dedicated MEMS processing technology."
  • Energy harvest by Piezo electric device
  • “Intelligent nose ring” which is nose ring form thermometer for animal husbandry
"Global network to support Intellectual Property"

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 1.2015 
Notice of Merger

It is announced that Coltibuono Trading Inc., a subsidiary company,
has been merged into Kyodo International Inc., effective as of November 1, 2015.

We appreciate all your continuous support up to the present and
we hope to have a better business partnership in the future.

Oct 27.2015 
We shall exhibit at "3rd Exhibition sponsored by Technology Research Association for Inertial Sensor
We shall exhibit at "3rd Exhibition sponsored by Technology Research Association for Inertial Sensor Applications", which will take place during 27th of November at Japan Society for the Promotion of Machine Industry.

Here are the details.

 [Details]
Date 27th(Fri), November 2015
Venue Japan Society for the Promotion of Machine Industry

 [Contents]
'Si-Ware Systems', ASIC for inertial sensor
  • A company dedicated to ASIC for MEMS. Support your design and development by product engineers with expertise of ASIC and MEMS.
  • ASIC service, not limited to ASIC Design, verification of concept and IP, offer Prototyping to Volume Production and testing.
  • Developed very low power ASIC for high-performance sensors by original IP.
  • Contribute reduction of development cost and term by original development tool of SWS61111
  • High performance inertial sensing ASIC, SWS1110
  • Inertial sensor development platform, SWS61111

If you intend to visit the event, do not hesitate to stop by our booth!

Oct 15.2015 
We shall exhibit at "THE 30TH PLANT ENGINEERING SHOW" of INCHEM TOKYO
We shall exhibit at "THE 30TH PLANT ENGINEERING SHOW" of INCHEM TOKYO on Wednesday 11/25 to Friday 11/27 at East Hall, Tokyo Big Sight.

Here are the details.


[Details]
Date & Time Date 11/25(Wed) - 27(Fri) 10:00 - 17:00
Venue Tokyo Big Sight

[Content]
-PERMASTORE Glass lining tanks (Methane digesters, Sludge tanks, Wastewater tanks)
-Submersible mixers and pumps
-Double and single membrane gasholders
-Gas flares
-Hexa floating covers

We are looking forward to seeing you at our stand.

Oct 6.2015 
We shall exhibit at "MNC2015 - 28th International Microprocesses and Nanotechnology Conference"
We shall exhibit at "MNC2015 - 28th International Microprocesses and Nanotechnology Conference" on Tuesday 11/10 to Thursday 11/13 at Toyama International Conference Center, Toyama, Japan.

Here are the details.

 [Details]
Date 11/10(Tue) - 13 (Thu)
Venue Toyama International Conference Center

 [Contents]
Nano/Micro Processing Service
We offer the optimum material and processes to meet your specific need in prototyping as well as providing standard device of MEMS and microfluidcs. 
  • Substrate : Various material available, such as silicon, glass and polymer
  • Deposition : Sputtering(120+kinds), evaporation, CVD, electro-plating and so on
  • Lithography/Nano-imprinting : Contact aligner, stepper, EB and nano-imprinting
  • Etching : Dry (ICP, RIE), wet and scarified etch and so on
  • CMP/Bonding : CMP, bonding and other related process
Phase-shifting mask exposure system 'PhableR 100'
The PhableR100 tool provides unprecedented ability to print high resolution periodic structures in a low-cost photolithography system.
  • High resolution below 300nm pitch
  • 4" full-field exposure
  • Non-contacted mask usable
  • Suitable for non-flat substrate
  • High uniformity below 3%
  • Overlay alignment capability
  • Available with commercial photoresist
  • Conventional mask
  • Frequency multiplication
Eulitha will provide a poster presentation regarding Phabler100.

If you intend to visit the event, do not hesitate to stop by our booth.

Sep 30.2015 
We shall exhibit at "THE 14TH JAPAN HOLSTEIN GRND PRIX"
We shall exhibit at "THE 14TH JAPAN HOLSTEIN GRND PRIX" on Friday 10/23 to Monday 10/26 at Hokkaido Holstein Exhibition Hall in Obira town, Hokkaido.

Here are the details.

 [Details]
Date 10/23(Fri) - 26 (Mon)
Venue Hokkaido Exhibition Hall

 [Contents]
SUEVIA High quality Cattle Drinking Bowls
Heated Drinking Bowls, Quick Drainage Trough
Heating Mat(Mo Mo mat)
Teat Quick Cleaner
Intelligent nose ring

We are looking forward to seeing you at our stand.

Sep 11.2015 
We will exhibit at "The 60th Annual Meeting of the Japan Society of Human Genetics"
We will exhibit at “The 60th Annual Meeting of the Japan Society of Human Genetics”, which will be held from 14th to 17th October.


 [Details]
Date 15th-17th of October.
Venue Keio Plaza Hotel Tokyo
Booth NO 7

 [Contents]
DNACollection Kit "OrageneDNA"
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
NEW OMNIgene・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/ stool for gut microbiome profiling.

Please visit our booth(No.7).

Sep 11.2015 
We will exhibit at "The 74th Annual Meeting of the Japanese Cancer Association".
We will exhibit at "The 74th Annual Meeting of the Japanese Cancer Association", which will be held from 8th to 10th October in NAGOYA

Here are the details.

 [Details]
date 8th-10th of October,2015
Venue Nagoya Congress Center
ブースNO No.S6 at Shiratori Hall

 [Contents]
Oxygen Controller ProOx110
We will exhibit Oxygen controller ProOx 110 which enables hypoxia/ hyperoxia control (0.1-99.9%) in your incubator or chamber.
We will also introduce Nitrogen gas generator which works by power supply.

If you intend to visit the event, do not hesitate to stop by our booth.

Aug 18.2015 
We will exhibit at “JASIS2015”
We will exhibit at “JASIS2015”, which will be held from 2nd to 4th September.
We will also give a presentation of our product in Advanced Diagnostics Innovation Zone on 3th September.

 [Details]
Date 2nd(Wed) to 4th(Fri) September, 2015
Venue MJakuhari Messe
Booth No AB-11 (Advanced Diagnostics Innovation Zone / Hall 8)

 [Contents]
DNACollection Kit "OrageneDNA"
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
NEW OMNIgene・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/stool for gut microbiome profiling.
[Presentation]
"Plainless, non-invasive collection kit
for high quality and high quantity human DNA and intestinal flora"

Date and time: 4th September(Thu) 13:00〜13:25
Room: Advanced diagnostics innovation zone
*No need advance application 。

Please visit our booth(AB-11 in Advanced Diagnostic Innovation Zone.)

Jul 24.2015 
We shall exhibit at "11th Topical Workshop on Heterostructure Microelectronics"
We shall exhibit at "11th Topical Workshop on Heterostructure Microelectronics(TWHM2015)", which will be held at Hida Hotel Plaza (Gifu, Japan) during 24th to 26th of Aug.  

Here are the details.

 [Details]
Date 24Th(Mon) to 26th(Wed) of Augst, 2015
Venue Hida Hotel Plaza 

 [Contents]
Processing services for R&D of GaN、SiC、etc power devices
  • We offer processing services from small volume for R&D purpose of Compound Semiconductor

If you intend to visit the event, do not hesitate to stop by our booth.

Jun 24.2015 
"Jamon de Mangalica" was introduced on August edition of "LEON".
Jamon de Mangalica was introduced on August edtition of "LEON".


It's introducedon on P. 127.  Please have a look.


Jun 8.2015 
We shall exhibit at "28th Techno-Transfer in Kawasaki 2015'"
We shall exhibit at "28th Techno-Transfer in Kawasaki 2015'", which will be held between the 8 10th of July.

Here are the details.

 [Details]
Date & Time 8th(Wed) 10 11th(Fri) of July, 2015, 9:00−17:00
Venue Kanagawa Sience Park (KSP)
304 West Wing, Innovation Center Building, 3-2-1 Sakado, Takatsuku, Kawasaki City,
Kanagawa 213-0012 Japan
Booth NO 3F-33

 [Contents]
A versatile Dry ice blaster SUPERBLAST Reborn

 "Applicable to various processing and exfoliation " 
  • Paint removal
  • Burr removal
  • Burnt removal of hotplate for food
  • Sterilization for medical and nursing care. And more!
 And more!

We offer manufacturing, sales, contract services and rental of “dry ice blasters” which are machines to blast milled dry ice by high pressure air.
We support your high level manufacturing with highly functional thin film
  • Antireflection film
  • Touch panel
  • Energy harvest
  • Fuel cell / rechargeable battery
 And more!

Please feel free to contact us.

Please visit our booth at TECHNO-TRANSFER in Kawasaki 2015.

May 12.2015 
We will exhibit at "The Japanese Association for Cancer and Hypoxia Research"
We will exhibit at "The Japanese Association for Cancer and Hypoxia Research" will be held at National Institute of Genetics during 5th (Fri) to 6th (Sat) of June.

Details are follows.


 [Details]
Date 5th (Fri)-6th (Sat) of June 2015
Venue National Institute of Genetics

 [Contents]
Oxygen Controller ProOx110
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Existing incubator will work as hypoxia/hyperoxia incubator along with this unit.
  • Oxygen in simple cases can be controlled to some extent.
  • Usage with C-Camber realizes reduction of gas consumption.
  • Usable as a gas environment controller in wide range of application such as cell cultivation, small animals, and botanical experiment.
Oragene Oragene
  • • All genetic analysis starts with the collection of DNA/RNA samples. Collect reliable samples with an all-in-one system for the collection, stabilization and transportation of DNA/RNA from saliva or feces.
Also we will make presentation of our products at 16:00〜16:30 on 5th June 2015.

We are looking forward to seeing you at the conference.

May 12.2015 
We shall exhibit at "Spanish Wine & Food Tasting 2015"
We shall exhibit at “Spanish Wine & Food Tasting 2015” which will be held at several locations in Japan during May to July.
Details are as follows.

[Details]
  1. Tokyo
    Date : May 21st (Thu), 2015
    Venue : Happo-en, 1F Jour
    Time : 12:00 - 17:00
    (15:00 – 17:00 for visitors who receive no invitation from exhibitors)
     
  2. Osaka
    Date : Jun. 10th (Wed), 2015
    Venue : ANA Crowne Plaza Osaka, 3F "Manyo"
    Time : 12:30 - 17:00
     
  3. Sapporo
    Date : Jun. 23rd (Tue), 2015
    Venue : JR Tower Hotel Nikko Sapporo, 36F "Taiyo"
    Time : 12:30 - 17:00
     
  4. Nagoya
    Date : Jul. 1st (Wed), 2015
    Venue : Hilton Nagoya 4F "Take"
    Time : 12:30 - 17:00
     
  5. Fukuoka
    Date : Jul. 13th (Mon), 2015
    Venue : Solaria Nishitetsu Hotel 8F "Tsuki / Hana"
    Time : 12:30 - 17:00

[Introduction to a part of exhibit]
<Espuna>
Jamon Serrano, Paleta Curada
  We introduce Jamon Serrano and Paleta Curada in sliced pacakge. 
Easy-to-use and suitable for small party.
<Espuna>
Kicon
  We introduce Espuna's original product. Soft and mild type salcichon. Easy-to-use. It's fixed weight pacakge.
<Iberiberico>
Jamon Iberico de Bellota, etc. 
  We introduce Iberian pork products from Jabugo, which is small village in Andalucia. Jabugo is famous for tradition and ritual in the artisan production of Iberian pork Ham. Sliced-pack prodcuts are also available.
<Vegajardin>
Cheese, Membrillo, etc.
  We introduce Spanish cheese, Membrillo (Quince Jam) which is good combination with cheeses.  

If you intend to visit the event, do not hesitate to stop by our booth.

May 8.2015 
We shall exhibit at "IPPS JAPAN 2015 - International Poultry & Pig Show"
We shall exhibit at "IPPS JAPAN 2015 - International Poultry & Pig Show"in Nagoya, Japan June 10-12, 2015.

Details are follows.

 [Details]
Date & Time 10th(Wed) to 12th(Fri) of June, 9:00-17:00 (9:00 - 16:00 on 12th)
Venue Nagoya International Exhibition Hall (Portmesse Nagoya)
2-2 Kinjo-futo, Minato-ku, Nagoya 〒455-0848
Booth NO C3
 

 [Contents]
  • Highly recommended!!
    ACO Funki Quality Farrowing Pens with max. comfortability for high performance sows including anti-craching and back support, coated backdoor, quality flooring, wide trough, light board profile and many more features.
  • Highly recommended!!
    Nedap Farrwoing Feeding System with capability of automatic correct feeding depending on sow conditions, lactation stage and the number of sucking piglets. No need for feed hopper adjustment. Time and labor saving.
  • SUEVIA Drinking Bowls and Nipples (Water loss savings)
  • SUEVIA Vacuum Valve (Increased water and feed intake)
  • FunkiMat 3 (Unique dosing system and no feed blocking)
  • Intelligent Heating Controller (Energy savings by automatic temperature control)
  • FerkoFer & Playfeeder (Stress-free, oral iron supplement)
  • Clean’Sec (Higher hygiene, moisture absorption)
  • Self-cutter 2 (Tail docking with ease and safety)
  • iFEEDER (Simple constructed feeder for ad-lib feeding)
  • Electronic Sow Feeding "VELOS"(Automatic individual feeding)

If you intend to visit the event, do not hesitate to stop by our booth.

Apr 28.2015 
We will exhibit at "The 11th International Workshop on Advanced Genomics"
We will exhibit at "The 11th International Workshop on Advanced Genomics" will be held at Hitotsubashi hall in Tokyo during 20th (Wed) to 22nd (Fri) of May.

Details are follows.

 [Details]
Date 20th (Wed)-22nd (Fri) of May 2015
Venue Hitotsubashi Hall
Booth NO 17

 [Contents]
We will exhibit DNA/RNA self-collection kits.
The sample collection kits for the collection, stabilization and transportation of human or microbial DNA/RNA
  • Oragene DNA for human DNA in saliva
  • Oragene RNA for human RNA in saliva
  • HEMAGene for human DNA in buffy coat
  • OMNIgene for microbial DNA/RNA in Saliva
  • OMNIgene GUT for microbial DNA in feces T

We are looking forward to your visit our booth (NO.17).

Apr 16.2015 
We will exhibit at “BIOtech 2015”
We will exhibit at "BIOtech 2015" will be held at Tokyo Big Sight during 13th (Wed) to 15th (Fri) of May.

Details are follows.

 [Details]
Date 13th (Wed)-15th (Fri) of May 2015
Venue Tokyo Big Sight, West hall
Booth NO 2-36

 [Contents]
DNA/RNA self-collection kit DNA/RNA self-collection kit
  • All genetic analysis starts with the collection of DNA/RNA samples. Collect reliable samples with an all-in-one system for the collection, stabilization and transportation of DNA/RNA from saliva or feces.
Droplet generators Droplet generators
  • Microfluidic droplet generators are excellent tools for generating highly reproducible microsized droplets. This way droplets are generated with much higher precision and repeatability compared to conventional methods.

We are looking forward to your visit our booth(NO.2-36).

Apr 13.2015 
We shall exhibit at “The symposium of Growing Nitride Semiconductor Crystal”
We shall exhibit at “The symposium of Growing Nitride Semiconductor Crystal” which will be held on 7th May.

Details are follows.

 [Details]
Date & Time 7th (Thu.) 13:00〜8th (Fri.) 16:20 (plan)
Venue Katahira Sakura Hall (Katahira Campus at Tohoku University
2-1-1 Katahira, Aoba-ku, Sendai-city, Miyagi prefecture  P〒980-8577

 [Contents]
LED
  • PSS/ Improved efficiency of LED light emittance! TEX series
    We will display TEX series which was developed uniquely, and has implemented uniform Nanoimprint service to non-equilibrium side.
Nitride power device Contract processing service
  • We will offer several kinds of contract processing service of GaN power semiconductor, which is for R&D, to our customers from one (1) piece.

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 24.2015 
We shall exhibit at "nano micro Biz"
We shall exhibit at "Nano Micro Biz", which will be held between the 22nd -24th of April.

Here are the details.

 [Details]
Date 22nd(Wed) to 24th(Fri) of April
Venue Pacifico Yokohama
Booth No D-15

 [Contents]
MEMS volume production foundry Co-exhibitor : Silex microsystems
  • φ6",8"compatible MEMS foundry  
  • Unique TSV technology : Sil-Via
    (For better thermal resistivity and higher density by applying all Si structure)
  • Unique TSV technology :Met-Via / Met-Cap
    (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK
    A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Nano / micro fabrication services
We offer nano/ micro fabrication service using the process of nanoimprint or semiconductor /MEMS.
Please consult us if you consider creating nano/ micro-scale sample or evaluation


[ Examples of manufacturing process ]
  • Thin film deposition (Sputtering, Evaporation, CVD, ALD, Electroplating, etc.)
  • Photolithography (Aligner, Stepper, E-Beam etc.)
  • Etching (Wet, Dry, Deep etching for high aspect ratio pattern (ICP), etc.)
  • CMP (Metal, Oxide film, Nitride film etc.)
  • Wafer bonding (Room temperature bonding, Plasma bonding, Eutectic bonding, Anodic bonding, etc.)
  • Nanoimprint (Mold fabrication, Imprint service, Anti-sticking coating etc.)
MEMS development tools
  • A lithography system for NIL mold fabrication “PhableR 100”
  • Resin-made multipurpose spin coater “POLOS”
    Made from chemical resistance resin. The system is applicable to multiple processes (coating, etching, development, cleaning, drying)
  • “AML wafer bonder”
    Alignment and bonding can be done in a single chamber.
  • “OAI Model 800” mask aligner
    Using OAI’s high quality light source, it is a compact mask aligner which is suitable for R&D Also, various UV meters and proves are available.

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 18.2015 
We shall exhibit at “MEMS Engineer Forum (MEF) 2015”
We shall exhibit at "MEMS Engineer Forum (MEF) 2015", which will be held at KFC Hall Annex during 20th (Mon) to 21st (Tue) of April.

Details are follows.

 [Details]
Date 20th (Mon), 21st (Tue) of April
Venue KFC Hall Annex

 [Contents]
MEMS volume production foundry "Silex Microsystems"
  • φ6",8" compatible MEMS foundry.
  • Unique TSV technology : Sil-Via (For better thermal resistivity and higher density by applying all Si structure)
  • Unique TSV technology :Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • High through-put sol-gel PZT in MEMS production line
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Total solution of ASIC for MEMS "Si-Ware Systems"
  • ASIC service, not limited to ASIC Design and IP, offer Prototyping to Volume Production and testing.
  • Support your design and development by product engineers with expertise of ASIC and MEMS.
  • Contribute reduction of development cost and term by original development tool

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 17.2015 
We shall exhibit at "MEDTEC Japan 2015"
We shall exhibit at "MEDTEC Japan 2015'", which will be held at Tokyo Big Sight during 22nd (Wed) to 24th (Fri) of April.

Details are follows.  

 [Details]
Date & Time Apr. 22(Wed.) -Apr.24(Fri.), , 10:00-17:00 (10:00 - 16:00 on 24th)
Venue Tokyo Big Sight East Hall 4, 5, 6
Boorh NO Ohta-ward and Kawasaki-city joint exhibition booth, NO:500 zone  K-3

 [Contents]  
Nano / Micro fabrication services
We offer nano / micro fabrication service by semiconductor manufacturing equipment.
Thin film deposition and patterning (Micro channel forming, mold fabrication for plastic and so on) for more than 120 various materials (Ti, Co, Si, Au etc) are available to meet your needs of small production and R&D. 

The application example of thin film/ micro fabrication technique in medical and nursing industry
  • Barrier use (SiO2, SiN and so on)
  • Antimicrobial (Ag, Cu and so on)
  • Deodorization (TiO2 and so on)
  • Coloring of medical / nursing care equipment (Al、Au、Ti and so on)
  • Irregular pattern forming on gum / plastic products
  • Microfluidic chip
MEMS foundry
Introduction of φ8” compatible foundry, which offers volume production service of customer designed MEMS device.
We will provide the suitable foundry solutions.

MEMS device production performance for medical use
  • Micro mirror array for medical equipment use
  • Micro needles
  • Wearable devices
Cleaning system "SUPERBLAST" for precision parts / equipment
"Dry Ice Blast Cleaning System" : Spraying dry ice pallets onto the material surface at high speed, so that it can remove dirt or oil.
“No abrasion against the cleaning objects” “No liquid waste” We will introduce the revolutionary cleaning method and system

SUPERBLAST usages are as follows in medical / nursing site
  • Mold cleaning of plastic products for medical / nursing
  • Equipment cleaning and sterilization for medical / nursing
  • Removal of solid sticking matter generated during pharmaceutical production
  • Periodical maintenance / removal of filth at medical facilities
  • Degrease of instruments / appliances

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 5.2015 
We shall exhibit at "The 6th Nanoimprint Technology Fair" which will be held inside FINETECH.
We shall exhibit at "Held inside FINETECH Japan '6th Nanoimprint Technology Fair'", which will be held between the 8 -10th of April. Here are the details..

Details are follows.

 [Details]
Date Apr.8(Wed.) -Apr.10(Fri.), 2015
Venue Tokyo Big Sight
Booth NO 45-13

 [Contents]  
Nanoimprint
  • Mold fabrication
    From nano mold to micro mold, we will provide you with high-quality fine mold to meet your demand.
  • Nanoimprint “Trial mold” for initial evaluation (Anti-reflection film, Photonic-crystal, Micro lens etc.)
  • Imprinting service (thermal / UV, mold injection)
  • Anti-sticking coating (FineMozt™)
  • Mold cleaning /replication service
  • Technical Consultation (By partnership with A*STAR, Singapore)
PSS Solution TEX series
  • Display “TEX series” PSS production system applying our proprietary nanoimprint techniques
  • Realization of whole surface micro/nano pattern on Sapphire/GaN substrates
  • Achieving elimination of pressurization and vacuum while realizing high throughput and reduced cost
    *TEX-01 will be exhibited at our booth
MEMS Development tool:
Phase-shifting Mask Exposure System "PhableR 100"

  • EULITHA:their proprietary photolithographic technology enables us to print high-resolution structures equivalent to that of the DUV lithography, in a non-contract, proximity photolithography with simplicity and at a reasonable cost. For nanoperiodic pattern mold fabrication.

If you intend to visit the event, do not hesitate to stop by our booth.

Jan 27.2015 
We shall exhibit at "FOODEX JAPAN 2015 - The 40th International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2015 - The 40th International Food and Beverage Exhibition", which will be held between the 3rd -6th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details
To FOODEX2015 official web site

If you intend to visit the event, do not hesitate to stop by our booth!

Jan 8.2015 
We shall exhibit at "Technical show Yokohama 2015"
We shall exhibit at "Technical show Yokohama 2015" which will be held at Pacifico Yokohama during 4th (Wed) to 6th (Fri) of February, 2015.

Details are follows.

 [Details]
Date Feb.4(Wed.) -Feb.6(Fri.), 2015
Venue PACIFICO Yokohama
Booth NO i-35 (Kawasaki Business Incubation Center (KBIC) Booth)
 

 [Contents]  
Introduction of Nanoimprint and Thin film fabrication processing service
Outsourcing of the specialized field contributes reduction of development period and initial introduction cost.This is appropriate for the people who intend to implement of increasing in sophistication of manufacturing by capturing of advancedtechnology.

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 26.2014 
We shall exhibit at "nano tech 2015" .
We shall exhibit at "nano tech 2015 - The14th International Nanotechnology Exhibition & Conference" which will be held at Tokyo Big Sight during 28th(Wed) to 30th(Fri) of January, 2015.

Details are follows.

 [Details]
Date Jan.28(Wed.) -Jan.30(Fri.), 2015
Venue Tokyo Big Sight
Booth NO 4L-06

 [Contents]  
Microfabrication service
  • Sputtering thin film deposition:semiconductors・LCDs, Power devices, Passivation layer, Material research
  • Etching contract processing:Photolithography, Dry/Wet etching
  • We offer MEMS design solutions from Technology Strategy, Design to Simulation
  • We offer integration of design to Prototyping, Test Production, Pilot Production and Volume Production Foundry Services
  • We correspond to individual requirements for Design, Prototyping and Volume Production
Nanoimprint
  • Nanoimprint mold fabrication “Trial mold” for initial evaluation (Anti-reflection film, Photonic-crystal, Micro lens etc.)
  • Imprinting service (thermal / UV)
  • Anti-sticking coating (FineMozt™)
  • Mold cleaning /replication service
PSS Solution TEX series
  • Display “TEX series” PSS production system applying our proprietary nanoimprint techniques
  • Realization of whole surface micro/nano pattern on Sapphire/GaN substrates
  • Achieving elimination of pressurization and vacuum while realizing high throughput and reduced cost
MEMS Development tool
  • EULITHA:their proprietary photolithographic technology enables us to print high-resolution structures equivalent to that of the DUV lithography, in a non-contract, proximity photolithography with simplicity and at a reasonable cost.

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 18.2014 
We shall exhibit at "16th IC PACKAGING TECHNOLOGY EXPO".
We shall exhibit at "16th IC PACKAGING TECHNOLOGY EXPO" which will be held inside "Nepcon Japan 2015" at Tokyo Big Sight during 14th(Wed) to 16th(Fri) of January, 2015.

Detail is as follows. 

 [Details]
Date January 14 [Wed] - 16 [Fri], 2015
Venue Tokyo Big Sight
Booth No EAST 44-18

 [Contents]  
MEMS volume production foundry "Silex Microsystems"
  • φ6",8" compatible world top MEMS foundry. High through-put sol-gel PZT in MEMS production line  
  • Unique TSV technology : Sil-Via(For better thermal resistivity and higher density by applying all Si structure)
     Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Total solution of ASIC for MEMS
  • ASIC service, not limited to ASIC Design and IP, offer Prototyping to Volume Production and testing.
  • Support your design and development by product engineers with expertise of ASIC and MEMS.  
  • Contribute reduction of development cost and term by original development tool
Total solution for MEMS development
  • Complete MEMS development solution from strategy to mass production
  • Design simulation avaialble
  • Suggestion meet customer budget and schedule

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 27.2014 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.27.2014 - Jan.4.2015

We shall resume the operation from the 5th of January, 2015.
For inquiries we will receive via our website during the period, you will retrieve reply after the 5th of January.
We appreciate for your understanding.

We wish you all happy holidays and are looking forward to working with you in 2015!


Oct 30.2014 
We shall exhibit at "SEMICON Japan 2014"
We shall exhibit at "SEMICON Japan 2014" which will be held at Tokyo Big Sight during 3th(Wed) to 5th(Fri) of December, 2014.

Details are as follows.

 [Details]
Date & Time 3th(Wed) to 5th(Fri) of December, 2014 10:00-17:00
Venue Tokyo Big Sight
Booth No Hall 4 4086、Hall 3 3086

 [出展内容]
Volume Production Solutions Booth  (Consumable parts/Thin film processing/Dry ice cleaning) :
4086
<Preventive Maintenance, Retrofitting>
  • CMP : Longevity Retaining Ring, Slurry arm , Post-CMP cleaning system, QC unit for brushing
  • Ion implantation : HYT particle monitor repair/refurbish, Consumable parts etc.
  • CVD : Heater refurbish
  • Others : Compact flush to substitute FDD , Motor repair, Circuit board repair, Oerlikon Leybold Turbo pump etc.
<Sputtering Targets and Thin Film Processing>
  • Contract processing from Prototyping to Mass Production
    - Thin film on 450mm substrate will be displayed -
  • Patterning Process : Reduce initial cost and delivery time by our original mask
  • Always 120 kinds of targets are available. Custom target supply is also possible
<Cleaning Solutions>
  • Dry ice cleaning system for precious cleaning : SUPERBLAST DSC-I
  • Sales and rental of cleaning machine. On-site cleaning service.
Research & Development Solutions Booth (MEMS/Thin film processing/Nanoimprint):
3086 (Sensor/MEMS Area in IoT pavillion)
<MEMS Total Solutions>
  • MEMS Foundry : From Prototyping to Mass Production, From Analog to ASIC
  • Various MEMS development tools: Phase-shift litho system (FableR100),
    AML Wafer Bonder, Multi-purpose Spin Processor
<Nano-micro Fabrication>
  • Sputtering : For Semiconductor, FPD, Power devices, Passivation, Material development
  • Etching : Photolithography, Dry/Wet Etching
  • Various substrates : Si wafer, Glass, SiC, Sapphire etc.
<Nanoimprint Total Solutions>
  • From Mold (Standard, Custom) to Imprint services (Prototyping, Mass Production)
  • Mold Replication, Cleaning, Refurbish, Surface treatment (Fine-MoZt)
  • Technical Consultation (By partnership with A*STAR, Singapore)
 *FREE* We will conduct Exhibitor Presentation
5th December (Fri) at TechSPOT EAST(Hall 3) AM11:30 - 12:20
”Proposal of growing market entry by using MEMS foundry”

If you intend to visit the event, do not hesitate to stop by our booth.

Oct 29.2014 
We shall exhibit at "2nd Exhibition sponsored by Technology Research Association for Inertial Sensor Applications"
We shall exhibit at "2nd Exhibition sponsored by Technology Research Association for Inertial Sensor Applications", which will take place during 28th of November at Japan Society for the Promotion of Machine Industry.

Here are the details.

 [Details]
Date 28th November 2014
Venue Lecture hall at second basement in Assembly Hall for Japan Society for the Promotion of Machine Industry, 3-5-8 Shibakouen Minato-ku Tokyo Japan 105-0011

 [Contents]
'Si-Ware Systems', ASIC for inertial sensor
  • Evolved into a standard products and custom ASIC provider.
  • Not limited to ASIC Design. Offer Prototyping to Volume Production.
  • Support your design and development by product engineers with expertise of ASIC and MEMS.

If you intend to visit the event, do not hesitate to stop by our booth!

Oct 27.2014 
We shall exhibit at "LAB-ON-A-CHIP ASIA"
We shall exhibit at the "LAB-ON-A-CHIP ASIA", which will take place during 20th to 21st of November at Nanyang Technological University in Singapore.

Here are the details

 [Details]
Date 20th to 21st of November, 2014
Venue Nanyang Technological University, Nanyang Executive Centre, Singapore

 [Contents]  
  • Microfluidics contract manufacturing
  • Nano-micro fabrication foundry
  • Nanoimprint solutions

If you intend to visit the event, do not hesitate to stop by our booth!

Oct 24.2014 
We shall exhibit at "The 59th Annual Meeting of the Japan Society of Human Genetics"
We are pleased to inform you that we will be exhibiting at the upcoming "The 59th Annual Meeting of the Japan Society of Human Genetics" and "The 21st Japanese Society for Gene Diagnosis and Therapy" held at Tower Hall Funabori on November 20th-20nd.

It is our honor to invite you to our booth and share specific details about our DNA collection and stabilization products for genetic analysis. The sales representative of DNAGenotek, which is Canadian manufacturer of DNA self-collection kit, Oragene, will also join the conference. If you would like to set up an appointment ahead of time, please email us and I would be happy to schedule you in.

Here are the details

 [Details]
Date 20th(Thu) -22nd(Sat) of November
Venue Tower Hall Funabori 4-1-1 Funabori Edogawa-ku Tokyo Japan
Booth No 32 (The 2nd floor of exhibition hall)

 [Contents]  
We will introduce all in one system for the collection, stabilization and transportation of DNA/RNA of human and microbe from saliva.
  • DNA collection kit Oragene for human DNA
  • RNA collection kit Oragene for human RNA
  • OMNIgene・DISCOVER for microbe DNA/RNA
  • HEMAgene・BUFFY COAT for human DNA in blood sample

If you intend to visit the event, please stop by our booth (No. 32).

Sep 25.2014 
We shall exhibit at "PiezoMEMS2014"
Our MEMS foundry partner 'Silex Microsystems' shall exhibit at "PiezoMEMS2014'", which will be held at Integrated Research Center of Kobe University, innovation center, between the 28th -29th of October.

'Silex Microsystems' will also give an oral presentations of 'PZT development towards high throughput zol-gel deposition in MEMS production line' at 10:10-10:25am on 28th October.

Here are the details.

 [Details]
Date 28th(Wed), 29th(Thr) of October
Venue Integrated Research Center of Kobe University, innovation center, 2F, Foyer

 [Contents]
MEMS volume production foundry
φ8" compatible world top MEMS foundry “Silex Microsystems”
  • High through-put sol-gel PZT in MEMS production line
  • Unique TSV technology : Sil-Via(For better thermal resistivity and higher density by applying all Si structure)
  • Unique TSV technology : Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK
    (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
'Silex Microsystems' will give an oral presentations of 'PZT development towards high throughput zol-gel deposition in MEMS production line'
  • Date & Time: 10:10-10:25am on 28th October
  • Presenter : Silex Microsystems VP R&D Dr. THORBJÖRN "Toby" EBEFORS

If you intend to visit the event, do not hesitate to stop by our booth!

Sep 25.2014 
We shall exhibit at "NNT2014"
We shall exhibit at "NNT2014 (13th International Conference on Nanoimprint and Nanoprint Technology)", which will take place during 22th -24th of October at ANA Crown Plaza Kyoto.

Here are the details.


 [Details]
Date 22th -24th of October, 2014
Venue ANA Crown Plaza Kyoto

 [Contents] Nanoimprint Total Solution
Mold
  • Mold fabrication (Standard / Custom)
  • Mold replication / Cleaning / Refurbishment services
  • Proprietary mold anti-sticking coating technology (Fine-MoZt)

Prototype to Volume production Foundry services
  • Prototyping/Engineering to Volume production Foundry services (By collaboration with A*STAR, Singapore)
  • Contract nanoimprinting services (Thermal/UV/Injection mold, Roll to Roll method)

PSS production system TEX-01(R&D), TEX-02(Volume production)>
  • Whole surface micron/nano patterning by imprinting can be realized on sapphire / GaN substrates
  • Photonic crystal can be fabricated
  • By using dedicated soft-mold, it realizes pressure-free, vacuum-free, high throughput and cost reduction.
 

If you intend to visit the event, do not hesitate to stop by our booth!


Sep 12.2014 
We shall exhibit at “The 73rd Annual Meeting of the Japanese Cancer Association”
We shall exhibit at "The 73rd Annual Meeting of the Japanese Cancer Association" which will be held between the 25th -27th of September at Pacifico Yokohama.

Here are the details.

 [Details]
Date 25th(Thu) -27th(Sat) of September
Venue Pacifico Yokohama 1-1-1 Minato Mirai, Nishi-ku, Yokohama 220-0012, Japan
Booth NO 6

 [Contents]  
Oxygen Controller ProOx110
Oxygen Controller ProOx110x
We introduce hypoxia incubation system which has been used in iPS cell and cancer cell research.
The oxygen controller which enables hypoxia/hyperoxia control (0.1-00.9%) and Nitrogen gas generator which works with only a single electric plug.
SHIVOX : An incubator glove box for in vivo mimicking
We introduce the prototype of incubator glove box for in vivo mimicking which is under development.
It realizes a series of incubation and experiment operation in a single box which is controlled in hypoxia/hyperoxia status without exposure to the atmosphere.

If you intend to visit the event, please stop by our booth (No. 16).

Jul 28.2014 
We shall exhibit at "JASIS2014"
We shall exhibit at "JASIS2014'", which will be held between the 3rd -5th of September. We will also give a presentation of our product in Advanced Diagnostics Innovation Zone on 5th September.

Here are the details.  


 [Details]
Date 3rd(Wed) to 5th(Fri) of September, 2014
Venue Makuhari Messe, Hall5
Booth No. AD-23 (Advanced Diagnostics Innovation Zone)
Floor Map

 [Contents]  
DNA Collection Kit "Oragene"
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
<NEW>HEMAgene・BUFFY COAT
  • Stabilizing reagent of DNA found in buffy coat cells in blood.
  • Once mixed in with the buffy coat cells, it stabilizes DNA for easy transport and storage at ambient temperatures
<Upcoming product>OMNIgene・GUT
  • An all in one system for the non-invasive self-collection and stabilization of microbial DNA from feces for gut microbiome profiling.
[Presentation] "Plainless, non-invasive collection kit for high quality and high quantity DNA"
Date and time: 5th September(Fri) 14:30〜14:55
Room:Advanced diagnostics innovation zone (AD-P)
*No need advance application

Please visit our booth (AD-23 in Advanced Diagnostic Innovation Zone).

Jun 9.2014 
We shall exhibit at "27th Techno-Transfer in Kawasaki 2014'"
We shall exhibit at "27th Techno-Transfer in Kawasaki 2014'", which will be held between the 9 -11th of July.

Here are the details.


 [Details]
Date 9th(Wed) to 11th(Fri) of July, 2014
Venue Kanagawa Science Park (KSP)
Booth NO  14

 [Contents]  
  SUPER BLAST
Surface cleaning through micro-fine dry ice particlespowered by high-pressure air
Dry ice blast equipment: sales – contract cleaning – equipment rental
 
Applications ideas:
  • Semiconductor manufacturing equipment parts cleaning
  • Removal of resin attached to the mold in injection molding
  • Machined parts degreasing
  • Outer wall cleaning
  • Food processing cutting tools cleaning
  • Cleaning of inside of chemical coating equipment
  • Hot plates used in the food industry
  • Impurity removal
  • Leaked engine oil
  • Surface finish
  • Cooling
  • Mirror polish and degreasing
  • Cleaning carriage of trains
  • Heat exchanger
  • Substrate deburring
  • Medical and nursing equipment cleaning and sterilization
 
 
Features of dry ice blasting
  • Hits target then directly sublimates ===> no liquid waste
  • Very soft, gentle cleaning ===> no damage to cleaned surface
  • Reuse of factory generated CO2 ===> no environmental impact
  

If you intend to visit the event, please stop by our booth!


May 22.2014 
We shall exhibit at "Spanish Wine & Food Tasting 2014"
We shall exhibit at “Spanish Wine & Food Tasting 2014” which will be held at several locations in Japan during May to July.
Details are as follows.

[Details]
  1. Tokyo
    Date : May 26th (Mon), 2014
    Venue : Keio Plaza Hotel Tokyo, The Main Bldg. 4F, Hana(B,C,D)
    Time : 12:00 - 17:00
    (15:00 – 17:00 for visitors who receive no invitation from exhibitors)
     
  2. Osaka
    Date : Jun. 10th (Tue), 2014
    Venue : ANA Crowne Plaza Osaka, 3F "Manyo"
    Time : 12:30 - 17:00
     
  3. Sapporo
    Date : Jun. 23rd (Mon), 2014
    Venue : JR Tower Hotel Nikko Sapporo, 36F "Taiyo"
    Time : 12:30 - 17:00
     
  4. Nagoya
    Date : Jul. 3rd (Thu), 2014
    Venue : Hilton Nagoya 4F "Take"
    Time : 12:30 - 17:00
     
  5. Fukuoka
    Date : Jul. 14th (Mon), 2014
    Venue : Solaria Nishitetsu Hotel 8F "Tsuki / Hana"
    Time : 12:30 - 17:00

[Introduction to a part of exhibit]
<Ramaders>
Sobrasada de Mallorca
  Mallorcan tradicional spreadable salami which is made from Mallorcan pork.
Finally available in Japan!!
<Wine>
 
  We introduce white wine and Sherry wine which are good combination with cured ham and sausage.
<Espuna>
Canitas
  Spanish Chorizo became a thin and short stick type. It's ideal as snack.
<Espuna>
Jamon Serrano sliced pack
  Not only a fixed weight but also a fixed number of pieces for one package.  

If you intend to visit the event, do not hesitate to stop by our booth.

May 19.2014 
We shall exhibit at "Biomass EXPO" which will be held inside Smart Community Japan.
We shall exhibit at held inside Smart Community Japan 'Biomass EXPO'", which will be held between the 18 -20th of June.

Here are the details.

 [Details]
Date & Time 18th(Wed) to 20th(Fri) of June, 10:00-17:00
Venue Tokyo Big Sight,  East hall 2 & 3
Booth NO  BE-30

 [Contents]  
Glass Lining Tank
The best containment solution with high quality, high performance and low cost for various application such as digester tanks and slurry tanks.
Submersible mixers and pumps
High agitation and pumping capability. Easy installation to various tanks.
Gas holders
Low cost gas storage solution. Single/ Double membrane types, Top mount type and Tank suspension type.
Gas flare
Safe and secure combustion. High quality for long time operation and durability.
Biogas analysis unit
All necessary components within a single housing. Precise measuring and sampling.
Hexa-Cover® Floating Cove
Blocks made of high quality plastic. Just put in blocks to tank creating a floating cover to reduce odor and evaporation and algae growth at low cost.
Seepex snake pumps
Compact and cost effective construction. Easy maintenance. Can transport the wide range of materials from low to high viscosity.

If you intend to visit the event, do not hesitate to stop by our booth!


May 2.2014 
We shall exhibit at "IVD Japan 2014" with DNA Genotek Inc.
DNA Genotek and Kyodo International shall exhibit at “IVD Japan 2014” which will be held at Tokyo Big Sight during 14th (Wed) to 16th (Frit) of May, 2014.

Details are as follows.

 [Details]
Date May 14th (Wed) to 16th (Fri)
Venue Tokyo Big Sight / WEST hall 4
Booth NO  11-56(DNA Genotek Inc.)

 [Contents]  The person in charge from DNA Genotek, the manufacturer of Oragene will be accompanied with us.
 DNA Collection Kit Oragene DNA Collection Kit "Oragene"
  • Preservation, extraction and purification of DNA can be done from saliva in room temperature.
HEMAgene・BUFFY COAT << NEW >>
We will introduce “HEMAgene BUFFY COAT” which realizes storage of DNA from blood in room temperature.
  • After adding the product to collected or frozen blood, the liquid is ready to store in room temperature.

If you intend to visit the event, do not hesitate to stop by DNA Genotek booth.


Mar 17.2014 
We shall exhibit at "Nano Micro Biz"
We shall exhibit at "Nano Micro Biz", which will be held between the 23rd -25th of Aprily.

Here are the details.


 [Details]
Date 23rd(Wed) to 25th(Fri) of April
Venue Pacifico Yojohama
Booth NO V-14

 [Contents]
MEMS volume production foundry
φ8" compatible world top MEMS foundry “Silex Microsystems”
  • Unique TSV technology : Sil-Via(For better thermal resistivity and higher density by applying all Si structure)  
  • Unique TSV technology : Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Nano / micro fabrication services
We offer nano/micro fabrication service by semiconductor manufacturing environment from small to large volume.
  • Thin Film Deposition (Sputtering/Evaporation/CVD/ALD/Electroplating/PZT film by PLD method etc.)
  • Photolithography (Aligner/Stepper/E-Beam etc.)
  • Etching (Wet/Dry/Deep etching for high aspect ratio pattern)
  • CMP
  • Wafer bonding
  • Nanoimprint
MEMS development tools
  • “PhableR 100” phase shift lithography system
  • “POLOS” multi-purpose spinner (Resin made)  
  • ”PiezoFlare 1200” PLD (Pulse Laser Deposition) system
  • Desktop hot plate
  • “AML wafer bonder”
  • ”OAI Model 800” Double side mask aligner for MEMS production

If you intend to visit the event, do not hesitate to stop by our booth!

Mar 17.2014 
We shall exhibit at "The 5th Nanoimprint Technology Fair" which will be held inside FINETECH.
We shall exhibit at Held in We shall exhibit at "Held inside FINETECH Japan '4th Nanoimprint Technology Fair'", which will be held between the 10 -12th of April.

Here are the details.


 [Details]
Date 9th(Wed) to 11th(Fri) of April, 2014
Venue Tokyo Big Sight
Booth NO 8-12

 [Contents] Nanoimprint Total Solution
Mold
  • Mold fabrication (Standard / Custom)
  • Mold replication / Cleaning / Refurbishment services
  • Proprietary mold anti-sticking coating technology (Fine-MoZt)

Prototype to Volume production Foundry services
  • Prototyping/Engineering to Volume production Foundry services (By collaboration with A*STAR, Singapore)
  • Contract nanoimprinting services (Thermal/UV/Injection mold, Roll to Roll method)

PSS production system TEX-01(R&D), TEX-02(Volume production)>
*TEX-01 will be exhibited at our booth
  • Whole surface micron/nano patterning by imprinting can be realized on sapphire / GaN substrates
  • Photonic crystal can be fabricated
  • By using dedicated soft-mold, it realizes pressure-free, vacuum-free, high throughput and cost reduction.
 

If you intend to visit the event, do not hesitate to stop by our booth!


Feb 28.2014 
We shall exhibit at "MEDTEC Japan" .
MEDTECへのリンクWe shall exhibit at “MEDTEC Japan", which will be held between the 9th -11th of April at Tokyo Big Sight.


Here are ditails;


 [Details]
Date 9th -11th of April, 2014
Venue Tokyo Big Sight
Booth NO 2613(in the Kawasaki city pavilion)

 [Contents]
ProOx Dry ice(CO2) cleaning system SUPERBLAST
  • Our proprietary cleaning system “Dry ice blast cleaner” is an ecological dry cleaning system which is suitable for burr removal, mold cleaning, fat removal. It is adequate for cleaning of medical equipment and parts as it does not generate residue and waste liquid.
Thin film coating services of various material Thin film coating services of various material
  • We offer thin film coating such as titanium, gold, ceramic at semiconductor-level clean room (Sputtering, CVD, Evaporation etc.)
 Bio-Printer for tissue engineering 3D Discovery Bio-Printer for tissue engineering 3D Discovery
  • Spatial control of cells and morphogens in a three-dimensional scaffold is an innovative approach to construct designed organotypic in-vitro models of soft and hard tissue.

If you intend to visit the event, do not hesitate to stop by our booth (#2613).


Feb 21.2014 
We shall exhibit at "The 13th Congress of the Japanese Society for Regenerative Medicine"
We shall exhibit at “The 13th Congress of the Japanese Society for Regenerative Medicine ", which will be held between the 4th -6th of March at Kyoto International Conference center.

Here are the details.

 [Details]
Date 4th -6th of March, 2014
Venue Kyodo International Conference center
Takaragaike, Sakyo-ku, Kyoto 606-0001 Japan
Booth NO 43

 [Contents]
酸素コントローラー ProOx Oxygen Controller ProOx110x
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Create an environment with various oxygen level for cell cultivation, animal/botanical experiment.
  • C-chamber for cell culture will reduce the consumption of gases.
  • Animal chamber can be used for hypoxia or high oxygen experiment for mouse and rats.
Glove box incubator system Glove box incubator system
  • Create an environment with various oxygen and CO2 level for cell cultivation in glove box.
  • It is possible to conduct various experiment and culture in glove box for a long time without change in Oxygen level.
 Bio-Printer for tissue engineering 3D Discovery Bio-Printer for tissue engineering 3D Discovery
  • Spatial control of cells and morphogens in a three-dimensional scaffold is an innovative approach to construct designed organotypic in-vitro models of soft and hard tissue.

If you intend to visit the event, do not hesitate to stop by our booth (#43).

 


Feb 3.2014 
We shall exhibit at "FOODEX JAPAN 2014 - The 39th International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2014 - The 39th International Food and Beverage Exhibition", which will be held between the 4th -7th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details

If you intend to visit the event, do not hesitate to stop by our booth!

Jan 31.2014 
We shall exhibit at "Supermarket Trade Show 2014"
We shall exhibit at “Supermarket Trade Show 2014” which will be held in February.

Details are as follows.

[Details]
Date : Feb. 12th - 14th, 2014
Venue : Tokyo Big Sight East Hall
Time : 10:00 - 17:00
(10:00 - 16:00 on 14th)

[Introduction to a part of exhibit]
< Sliced package >
Sliced pack of imported ham and salami, suitable for consumers
We introduce sliced pack of imported ham and salami from Italy, Spain, Germany, Hungary and USA. It's sliced in our slicing factory in Japan.
<Product without artificial coloring and preservative> We introduce cured ham and salami which are without artificial coloring and preservative such as sodium nitrite.
<Mangalica Pacetta>
 
We introduce Pancetta produced using Mangalica belly by our special recipe in our Japanese cured ham factory.

Dec 24.2013 
We shall exhibit at "nano tech 2014" .
We shall exhibit at "nano tech 2014 - The13th International Nanotechnology Exhibition & Conference" which will be held at Tokyo Big Sight during 29th(Wed) to 31st(Fri) of January, 2014.

Details are follows.

 [Details]
Date & Time Jan.29(Wed.) -Jan.31(Fri.), 2014 10:00 - 17:00
Venue East Exhibition Hall 4, 5, 6 & Conference Tower, Tokyo Big Sight, Japan
Booth NO 5E-05

 [Details]
Booth NO:5E-05
<<Nanoimprint Total Solution>>spin processor
  • Mold fabrication (Standard / Custom)
  • Multi purpose spin processorContract imprinting services (Thermal / UV / Mold injection)
  • Mold Replication / Cleaning / Refurbishment
  • Proprietary mold anti-sticking treatment technology (Fine-Mozt)
  • From Prototyping-consulting to volume production foundry (by collaboration with A*STAR, Singapore)

<<Nano pattern processing systems>>
  • Phase shift lithography system “PhableR 100 by Eulitha” which realizes high cost performance in <300nm patterning.
  • Multi purpose spin processor “SPIN150i” which enables various wet processes (coating, developing, etching and cleaning) with this system. 
  フロアマップ

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 13.2013 
We shall exhibit at "15th IC PACKAGING TECHNOLOGY EXPO", "LIGHTING JAPAN 2014"
We shall exhibit at "15th IC PACKAGING TECHNOLOGY EXPO" and "LIGHTING JAPAN 2014" which will be held inside "Nepcon Japan 2014" at Tokyo Big Sight during 15th(Wed) to 17th(Fri) of January, 2014.

Detail is as follows.

 [Details]
Date & Time January 15 [Wed] - 17 [Fri], 2014 10:00-18:00 (10:00-17:00 on Jan. 17)
Venue Tokyo Big Sight
Booth No East 40-16、East 44-33

 [Contents]
15th IC PACKAGING TECHNOLOGY EXPO :East 40-16
<<MEMS Total Solution>>
  • MEMS foundry – from prototyping to volume production
  • Silex Microsystems’ proprietary packaging process (e.g. Sil-Via, Met-Via, Met-Cap) and process standardization methodology (SmartBlock)
  • MEMS design and simulation (packaging and reliability testing)
  • Wafer Bonding processing (Wafer Level Packaging)
  • TSV
  • Various thin film patterning and processing procedures
LIGHTING JAPAN 2014 : East 44-33
PSS TEX-01<<PSS manufacturing system TEX-01, 02>>
  • We shall display real machine of dedicated PSS manufacturing system “TEX-02”
  • Realizes whole-surface nano/micron pattern transfer to Sapphire and GaN substrates 
  • Enables to fabricate photonic crystal
  • Dedicated soft mold realizes no pressure and no vacuum imprint which leads to high throughput and less cost  
<<Nanoimprint Total Solution>>
  • Mold (Standard/Custom), Imprint (Prototyping/Volume production)
  • Mold replication, cleaning, refurbishment, surface anti-sticking treatment (Fine Mozt)
  • Technical consultation (by collaboration with A*STAR, Singapore)
<<Thin Film Patterning Services>>
  • Sputtering thin film formation. Applications : LED, Semiconductor, FPD, Power devices, Secondary battery, Passivation layer, Material research etc.
  • MOCVD contract processing (GaN and GaN system etc.)
  • Etching contract processing (Photolithography, Dry/Wet etching)
  • Various substrates for experiment (Sapphire, Si, SiC, Glass etc.)

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 22.2013 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.28.2013 - Jan.5.2014

We shall resume the operation from the 6th of January, 2014.

For inquiries we will receive via our website during the period, you will retrieve reply after the 6th of January. We appreciate for your understanding.
 
We wish you all happy holidays and are looking forward to working with you in 2014!


Nov 12.2013 
We shall exhibit at "Cancer and Hypoxia seminar" .
We shall exhibit at "Cancer and Hypoxia seminar" which will be held between the 13 -14 of December at Pacifico Yokohama.

Here are the details.

 [Details]
Date 3rd(Thu) -5th(Sat) of October
Venue Sakura Hall, Katahira Campus, Tohoku University

 [Contents]
Oxygen Controller ProOx110 Oxygen Controller ProOx110
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Create an environment with various oxygen level for cell cultivation, animal/botanical experiment.
Xvivo Cell incubation processing system Xvivo
  • Usable as clean room or isolator by realizing Class100 environment.
  • ontrol of temperature, humidity, oxygen and CO2 level enables long term cell cultivation in a given set of circumstances.
 DNA collection kit : Oragene-DNA DNA collection kit : Oragene®-DNA
  • DNA from saliva is conservable in room temperature.
  • The median DNA yield from 2ml Oragene/saliva samples is 110?g (median value)
  • High compatibility to various applications after DNA purification

If you will attend the seminar, please stop by our booth.

Nov 6.2013 
We shall exhibit at "SEMICON Japan 2013"
We shall exhibit at "SEMICON Japan 2013" which will be held at Makuhari Messe (Chiba, Japan) during 4th(Wed) to 6th(Fri) of December, 2013.

Details are as follows.

 [Details]
Date & Time 4th(Wed) to 6th(Fri) of December, 2013 10:00-17:00
Venue Makuhari Messe (Chiba, Japan)
Booth No 3C-722、M5-001 (Detail is as below)

 [Contents]
Booth #1 (Material, Thin film. Cleaning, Consumables):3C-722
<Material For Thin Film>
  • Cylindrical sputtering targets for sophisticated electronics devices and films : Photovoltaic, Flat panel, Touch panel, Glass building material.
  • Cylindrical sputtering targets
<Sputtering thin film fabrication>
  • 120 types of targets are always available in stock. We offer contract processing of thi film deposition from prototyping to volume manufacturing.
<Repair and maintenance, Retrofitting> – We offer improvement/retrofitting of CMP equipment -
  • Consumable parts : Retaining ring with longevity, Slurry arm, Post CMP cleaning system : QC unit for brush tank
  • Repair : Mega torque motor & Driver, Rotary union, Slurry motor
<Cleaning> – Cleaning system sales/rental, On site/Off site cleaning services -
  • Dry ice blast system for precision cleaning : DSC-I
  • Dry ice blast for general industrial use : KG-11S
Booth #2 (Thin film, Photolithography, MEMS, Nanoimprint):M5-001
(* at Advanced electronics technology pavilion)
<Nano/micro Patterning>
  • Sputtering thin film deposition
    Applications: Semiconductors, FPD, Power device, Secondary battery, Passivation layer, Material development etc.
  • Photolithography/etching (Dry and Wet etching)
  • Various substrate for R&D(Si wafer, Glass, SiC, Sapphire etc.)
<MEMS Total Solution>
  • MEMS foundry services: Prototyping to Volume manufacturing (Silex Microsystems AB)
  • MEMS Development Tools (PLD system for PZT thin film, All-resin-made multi-purpose Spin processor etc.)
<Nanoimprint Total Solution>
  • Mold (Standard/Custom) to Imprint (Prototyping to Production)
  • Mold replication, cleaning, refurbishment, anti-stick treatment (Fine-Mozt
  • PSS Solution TEX-01
  • Technical consultation (by collaboration with A*STAR, Singapore)
<PSS Solution TEX-01>
  • Our unique PSS manufacturing system “TEX-01”
  • Realizes whole area imprinting of nano/micro pattern on sapphire/GaN substrate
  • Achieves high throughput and less cost by realizing pressure-free and vacuum-free process by dedicated soft mold 
 Seminar PresentationNo admission)

  1. 5th December (Thu) AM 1030 - 1050 (Hall-1 TechSTAGE WEST)
    ”Introduction of Sputtering services”
  2. 6th December (Fri) PM3:30 – 3:50 (Hall-6 TechSTAGE EAST)
    ”We offer integrated services of Nanoimprint, from prototyping to production!”

If you intend to visit the event, do not hesitate to stop by our booth.


Nov 1.2013 
We shall exhibit at "The 58th Annual Meeting of the Japan Society of Human Genetics".
We shall exhibit at “The 58th Annual Meeting of the Japan Society of Human Genetics” which will be held at Koyo Grand Hotel during 20th (Wed) to 23rd (Sat) of November, 2013.

Details are as follows.

[Details]
Date & Time November 20th (Wed)  13th (Fri) 10:00 ? 17:00
Venue Koyo Grand Hotel (Senday, Miyagi, Japan)

 [Content]
DNAGenotech
The person in charge from DNA Genotek, the manufacturer of Oragene will be accompanied with us as same as previous time.
We will introduce the products based on reference information inside/outside Japan.
 DNA Collection Kit "Oragene" DNA Collection Kit "Oragene"
  • Preservation, extraction and purification of DNA can be done from 2ml of saliva in room temperature.
HEMAgene・BUFFY COAT
We will introduce “HEMAgene BUFFY COAT” which realizes storage of DNA from blood in room temperature.
  • After adding the product to collected or frozen blood, the liquid is ready to store in room temperature.

If you intend to visit the event, do not hesitate to stop by our booth.


Oct 15.2013 
Kyodo International signs partnership agreement with A*STAR’s Nanoimprint Foundry in Singapore.
Kyodo International, Inc. has signed a partnership agreement with A*STAR’s Nanoimprint Foundry in Singapore.

Through this agreement, both parties will work towards the promotion of nanoimprint activities across various industrial sectors. Kyodo International, a top company in thin film processing will be working with the Foundry as its mold supplier. Nanoimprinting is a patterning process that will enable end users to fabricate both low and high resolution patterns on polymeric, metallic, and even glass resin materials on various substrates that have been previously unachievable through conventional manufacturing technologies.
It is applicable in areas from the semiconductor to patterned media and even biomedical and is expected to provide an industrial breakthrough in lowering manufacturing costs and improving productivity.

This partnership with A*STAR’s Nanoimprint Foundry is announced in this webpage

Sep 26.2013 
We shall exhibit at "German Festival 2013"
We shall exhibit at “German Festival 2013” which will be held in October.

Details are as follows.

[Details]
Date : Oct. 11th (Fri) ~ 14th (Mon), 2013
Venue : Aoyama Park South area (7-23 Roppongi Minato-ku Tokyo)
Time : 11:00 - 21:00
(17:00 – 21:00 on 11th(Fri))

Two types of special products; Black Forest Ham (Schwarzwalder Schinken) and Black Forest Bacon (Schwarzwalder Bauchspeck) , which are smoked by fir tree from Southern part of Germany, and cute design sausage are avaialbe at this event.
Enjoy German tasty meat products!


Sep 26.2013 
We shall exhibit at "Spanish Wine & Food Tasting 2013"
We shall exhibit at “Spanish Wine & Food Tasting 2013” which will be held in October.

Details are as follows.

[Details]
Date : Oct. 8th (Tue), 2013
Venue : HAPPO-EN 1F "JOUR"
Time : 12:00 - 17:00
(15:00 – 17:00 for visitors who receive no invitation from exhibitors)

[Introduction to a part of exhibit]
< Espuna >
Canitas Chorizo
Spanich chorizo became a thin and short stick type. It's ideal as snack. 
<Vegajardin>
Queso al Romero
We introduce newly added cheese to our cheese selection. It's made from sheep milk and coated with rosemary after maturation.
<Vegajardin>
Picos
Our Picos (Spanish tradicional cracker) was renewed. Smaller package and lighter texture.

Sep 18.2013 
We shall exhibit at “The 54th Battery Symposium in Japan”
We shall exhibit at "The 54th Battery Symposium in Japan" which will be held between the 7th -9th of October at the Osaka International Convention Center

Here are the details.

 [Details]
Date 7th(Mon) -9th(Wed) of October, 2013
Venue Osaka International Convention Center 3F (Planned)
Booth No 41
* For participation to the symposium, please refer to the official website.

 [Contents] We offer thin film fabrication service for R&D! 
Thin film fabrication service
We offer sputtering service utilizing our own semiconductor manufacturing equipment.
  • LiPON film for solid electrolyte
  • LiCoO2, LiMn2O4etc. for positive electrode
  • Nb2O5, Si etc. for negative electrode
““Possible to fabricate film stack of positive electrode / solid electrolyte / negative electrode”. We correspond to requested combination and composition of materials.
R&D tools

Should you have a plan to participate in the symposium, please stop by our booth.

Sep 10.2013 
We shall exhibit at “The 72nd Annual Meeting of the Japanese Cancer Association”
Go to Official websiteWe shall exhibit at " The 72nd Annual Meeting of the Japanese Cancer Association “ which will be held between the 3rd -5th of October at Pacifico Yokohama.

Here are the details.

 [Details]
Date 3rd(Thu) -5th(Sat) of October
Venue Pacifico Yokohama 1-1-1 Minato Mirai, Nishi-ku, Yokohama 220-0012, Japan
Booth No 31

 [Contents]
Oxygen Controller ProOx110 Oxygen Controller ProOx110
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Create an environment with various oxygen level for cell cultivation, animal/botanical experiment.
Xvivo Cell incubation processing system Xvivo
  • Usable as clean room or isolator by realizing Class100 environment.
  • ontrol of temperature, humidity, oxygen and CO2 level enables long term cell cultivation in a given set of circumstances.
  NUV femtosecond laser 3D nanodissection & microtome
  • Realizes three dimensional dissection and manipulation for tissue, cell and organelle.
 DNA collection kit : Oragene-DNA DNA collection kit : Oragene®-DNA
  • DNA from saliva is conservable in room temperature.
  • The median DNA yield from 2ml Oragene/saliva samples is 110?g (median value)
  • High compatibility to various applications after DNA purification
3D Discover 3D bioprinter 3D Discovery
  • Generates scaffold in micron order for 3D culture.
cellTRAY Microfluidics based live cell imaging system cellTRAY
  • A live cell imaging system for embryo cell with precise environment control and nutritional support.
  • More close in vivo environment enables long terms imaging.

If you will attend the conference, please stop by our booth.

Sep 6.2013 
We shall exhibit our products at “Summit VFC Joint Seminar 2013”
We shall exhibit our products at "Summit VFC Joint Seminar 2013" on Friday 10/11 at Tsukuba International Congress Center(EPOCHAL TSUKUBA).

Here are the details.

 [Details]
Date & Time Oct. 11th(Fri) , 2013  10:00-17:15 (Reception will be open from 9:00)
Venue Tsukuba International Congress Center (EPOCHAL TSUKUBA)

 [Contents]
  • Electronic Sow Feeding "Velos"
  • Performance Test Feeder
  • Wet/Dry Feeder "FunkiMat"
  • Automatic temperature control "Intelligent Heat Lamp"
  • Controlled Farrowing Feeding System

If you intend to visit the event, do not hesitate to stop by our booth!

Aug 15.2013 
We shall exhibit at “The 74th JSAP EXPO AUTUMN 2013”
We shall exhibit at "The 74th JSAP EXPO AUTUMN 2013" which will be held between the 16th -19th of September at Doshisha University Kyotanabe campus.

Here are the details.

 [Details]
Date & Time 16th (Mon) to 19th (Thu) of September (Seminars will be held till 20th (Thu)) 10:00 - 18:30
Venue Doshisha University Kyotanabe campus Davis memorial hall (1-3 Tatara Miyakodani, Kyotanabe City)
Booth NO A-14

 [Contents] Kyodo International offer the solution as ”A Coordinator of micro fabrication”
Patterning services    
Based on semiconductor technologies, we offer the best solution to your specific requirement.
  • Sputtering process : 120+ kinds of targets are in stock
  • Ion implantation: Selectable from 60 kinds
  • Photolithography : Aligner/Spetter/EBeam etc.
  • Etching: Process with the most appropriate condition by Wet/RIE/DRIE
  • CVD process : Selectable from various methods such as plasma, LP etc. From small to large substrate.
  • CMP process : Possible to propose customized slurry by jointly developing adequate material and condition.
Unique process techniques/Unique IP by collaboration
  • Nanoimprint process : One stop service from mold fabrication to imprinting
  • PSS process : Unique PSS process which is developed based on nanoimprint technologies for compound semiconductors
  • Partnership with micronit microfluidics , Holland / A*STAR, Singapore (SIMTech) in order to offer design/simulation/prototype/manufacturing of microfluidics
  • Also we offer engineering services for customers who start from scratch
Fabrication tool for R&D
  • PLD deposition system “Piezo Flare 1200” for high quality PZT layer formation
  • Multi purposes all-resin-made spinner “POLOS”
If you intend to visit the event, do not hesitate to stop by our booth.

Jul 17.2013 
About discontinue of Column purification kit for Oragene, PT-C2D-50
As of Aug, 2013, “Column purification kit for Oragene, PT-C2D-50” will be discontinued.

Last date of order taking 26th Aug, 2013 (Mon) * We will be not able to take orders after this date.
Item to be discontinued Column purification kit for Oragene, PT-C2D-50.
Reason of discontinuing Declined needs of manual purification due to increase demand of DNA automatic extraction.
Substitute item Purified solution for Oragene. PT-L2P-5, or other column purification kit.


Please ask for detail.

TEL:044-853-2958(Business Development Department)
Inquiry Form


Jun 7.2013 
We shall exhibit at "Nano Micro Biz"
Go to official web site.We shall exhibit at "Nano Micro Biz", which will be held between the 3rd -5th of July.

Here are the details.

[Details]
Date & Time 3rd(Wed) to 5th(Fri) of July, 2013 10:00-17:00
Venue Tokyo Big Sight
Booth No Hall 2, D-22

 [Contents]
MEMS volume production foundry
Co-exhibitor : Silex microsystems
 Exhibit Products photos  
  • “Silex Microsystems” stays on top as a leader of the “MEMS pure-play foundry”!
  • Owns dedicated production lines ofφ6" andφ8". Silex offers the best foundry solutions to clients based on hundreds of MEMS devices development and production.
  • Silex offers revolutionary unique technologies in MEMS device packaging.  
  • Unique TSV technology  Sil-Via(All Si though via)
    All Si structures eliminates metal filling process. Enables usage in high temperature (<1100℃)
  • Unique TSV technology  Met-Via/Met-Cap
    Eliminates issues of conventional Cu-TSV by applying Cu hollow structure for improvement in productivity and reliability.

 "When you outsource to foundry? It should be now!"

Nano micro fabrication

Kyodo International offer nano scale / micro scale fabrication applying semiconductor manufacturing equipment.
We support clients who are willing to enter Nano Micro Biz based on our expertise and experiences. 

Examples of processes】

  • Thin film deposition (Sputtering / Evaporation / CVD / Electroplating / PZT film by PLD method etc.)
  • Photolithography (Aligner, Stepper, E-Beam drawing etc.), Etching (Wet, Dry, High aspect ratio deep etching)
  • CMP, Wafer bonding

<Nanoimprint>
We are the only one-stop integrator of nanoimprinting from fine mold fabrication & surface treatment, imprint to technical consultation (prototyping to production).

【Example of processes】

  • Trial (standard) mold / Custom mold
  • Imprint services (Thermal/UV/Injection molding)
  • Surface treatment technology () for anti-sticking functionality. Enables imprint of aspect ratio 10 pattern!
  • Mold cleaning / replication services
  • Nanoimprint technical consultation by collaboration with A*STAR, Singapore
  • Compound semiconductor photolitho solution “” applying soft mold
MEMS development tools
  • ”PiezoFlare 1200”, Pulse laser deposition (PLD) system
    In addition to deposition of high quality PZT, the system enables to realize formation of lower/upper electrode, and LNO buffer layer
  • “POLOS” Multi-purpose spinner
    Made from chemical resistance resin. The system is applicable to multiple processes (coating, etching, development, cleaning, drying) 
  • Wafer bonding system “AML wafer bonder”
    Alignment and bonding can be done in a single chamber
  • ”OAI Model 800” Mask aligner
    It is a compact model for single side lithography (back side alignment is optional) which is suitable for R&D.

If you intend to visit the event, do not hesitate to stop by our booth!

May 24.2013 
We shall exhibit at "18th Guangzhou International Lighting Exhibition”
We shall exhibit at Double Bond Chemical(DBC) booth in "18th Guangzhou International Lighting Exhibition ", which will be held between the 9 -12th of June.

Here are the details.

 [Details]
Date & Time 9th(Sun) to 12th(Wed) of June, 2013 09:30-18:00
Venue China Import and Export Fair Complex
Booth NO Pavilion Hall 13.2, A16

 [Contents]
PSS solution for LED industry
  • Introduction to our original PSS production system "TEX-01"
  • Enables whole surface imprint of micro/nano pattern to sapphire and GaN substrates.
  • Realizes high throughput by system configuration without pressure and vacuum. 

If you intend to visit the event, do not hesitate to stop by our booth!

May 15.2013 
We shall exhibit at the “11th World Congress of Biological Psychiatry”.
Go to the official websiteWe shall co-exhibit with DNAgenotek, the manufacturer of DNA collection kit “OrageneTM” at the “11th World Congress of Biological Psychiatry” which will be held at Kyodo International Conference Center during 23rd (Sun) to 28th (Thu) of June, 2013.


Here are the details.

 [Details]
Date 23rd (Sun) to 28th (Thu) of June, 2013.
Venue Kyoto International Conference Center Takaragaike, Sakyo-ku, Kyoto 606-0001 Japan
Booth No. 6

 [Contents]
DNA collection kit : Oragene-DNA DNA collection kit : Oragene®-DNA
  • This kit solely enables DNA collection from saliva and long-term preservation
  • Accurate DNA collection : Average bacteria contain 11.8%, Molecular mass >23kb
  • The median DNA yield from 2ml Oragene/saliva samples is 110µg
  • High compatibility to various applications after DNA purification
This time the responsible person from DNAGenotek, the manufacturer of Oragene will come over for co-exhibition. Other than Oragene, we will exhibit OMNIgene wchish is a kit to collect DNA/RNA from bacteria/virus in saliva.
We shall introduce reference information of OrageneDNA’s superiority against blood collection and results from past researches.

Also an Oragene user, Dr. James Kennedy will make a presentation at this conference. Dr. James has executed gene test for thousands people during 7 years using Oragene and has been evaluating its validity. Moreover, he is aiming to specify particular parts of gene which relate to patient’s response of drug and pathology of side effect.
Should you have any interest, please attend the presentation.

If you will attend the conference, please stop by our booth.


Mar 14.2013 
We shall exhibit at "The 4th Nanoimprint Technology Fair" which will be held inside FINETECH.
Go to official web site.We shall exhibit at Held in We shall exhibit at "Held inside FINETECH Japan '4th Nanoimprint Technology Fair'", which will be held between the 10 -12th of April.

Here are the details.

 [Details]
Date & Time : 10th(Wed) to 12th(Fri) of April, 2013 10:00-18:00 (-17:00 on 12th of Apr.(Fri))
Venue : Tokyo Big Sight
Booth No:Hall 3, 28-23

 [Contents]
Nanoimprint  Exhibit Products photos  
  • Fabrication service of mold, "Trial mold" for initial evaluation.
    (AR pattern, Photonic crystal, Micro Lenz, etc.)
  • Imprinting service (thermal / UV Mold injection/)
  • Unique Anti-sticking coating which correspond to high aspect ratio (FineMoZt )
  • Mold cleaning /replication service
PSS solution for LED industry
  • Introduction to our original PSS production system ""
    Enables whole surface imprint of micro/nano pattern to sapphire and GaN substrates. Realizes high throughput by system configuration without pressure and vacuum.
Development Tool
  • Mask aligner with NIL option "Model 800"
    17nm nanoimprint by licensed technology from Hewlett Packard. Minimize de-molding damage which is typical issue of UV imprint by natural release thanks to substrate stress and air control.

If you intend to visit the event, do not hesitate to stop by our booth!

Mar 14.2013 
We shall exhibit at "60th JSAP EXPO Spring 2013"
We shall exhibit at "The 60th JSAT Spring Meeting/Exhibition" which will be held from 27th (Wed) to 30th(Sat) of March, 2013". together with Ion Technology Center Co, Ltd.

Here are the details

[Details]
Date & Time 27th(Wed) to 30th(Sat) of Mar., 2013 10:00-18:00 (-13:00 on 30th (Fri))
Venue Kanagawa Institute of Technology
Booth No. 2V-13 (The 2nd Gymnasium)
Contents Various contract processing for research and development
(Power devices, Photovoltaics, MEMS, NIL etc.)
*We shall display R&D tool “POLOS”

If you intend to visit the event, do not hesitate to stop by our booth!

Feb 28.2013 
We shall exhibit at the "MEMS 2013 Engineer Forum"
We shall exhibit at the "MEMS 2013 Engineer Forum", which will be held between Mar. 13th and 14th.

Here are the details.

[Details]
Date Mar. 13th., 14th.
Venue KFC Hall (Ryogoku/ Tokyo) (Access)

[Contents]
Volume Production Foundry Services
Silex microsystems, Sweden. Owns dedicated φ6" and φ8" MEMS production lines.
Silex offers the best process based on its reference and expertise as the global #1 MEMS foundry.
・Introduction of unique technologies such as Sil-VIA(TSV by Si material) and Met-Cap.
Micronit microfluidics, The Netherlands. Mirconit offers volume production foundry services of glass based MEMS devices based on abundant expertise in microfluidics fabrication.
Special Presentation
March 14th, Thu. 15:30-16:10 PL-14  Silex Microsystems Magnus Rimskog

If you intend to visit the event, do not hesitate to stop by our booth.

Feb 22.2013 
We shall exhibit at ”The 12th Congress of the Japanese Society for Regenerative Medicine”
Go to Official pageWe shall exhibit at “The 12th Congress of the Japanese Society for Regenerative Medicine ", which will be held between Mar. 21st to 23rd.

Here are the details.

[Details]
Date Mar. 21st (Thu) to 23rd (Sat)
Venue Pacifico Yokohama(Access
Booth No.

47


[Contents]
BioSpherix社
Xvivo System Glove Box Incubator System
  • Gas tension of O2, N2 and CO2 inside the Xvivo can be strictly controlled. 
  • Various experimental operations can be executed under hypoxia/hyperoxia environment.
  • Multiple chambers enables simultaneous incubation with different environment. 
  • Modules and chambers can be configured according to cell incubation protocols.
Oxygen Controller ProOx110
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Existing incubator will work as hypoxia/hyperoxia incubator along with this unit.
  • Usage with C-Camber realizes reduction of gas consumption.
  • Usage with animal chamber enables small animal experiences (mise, rats) in hypoxia/hyperoxia environment. 

If you intend to visit the event, do not hesitate to stop by our booth.

Feb 22.2013 
We shall exhibit at "PIG FARMING EQUIPMENT SHOW” next to “INTERNATIONAL PIG FARMING FORUM 2013”.
We shall exhibit at "PIG FARMING EQUIPMENT SHOW” on Monday 3/18 and Tuesday 3/19 at Asakusabashi Hulic Hall in Asakusabashi.

Here are the details.

[Details]
Date 2013/3/18-19
Venue Asakusabashi Hulic Hall
1-22, Asakusabashi, Taitou-ku, Tokyo
1-minute walk from Asakusabashi Station of JR Soubu Line
Contents
  • Wet/Dry Feeder “FunkiMat”
  • Electronic Sow Feeding “Velos” & Sorter for finishers
  • “Intelligent Heat Lamp” for piglets and weaners
  •   Pig Performance Test Feeder
  •   Farrowing Feeding System
  •   AI Catheter “Prefer"
  •   Ad-lib Sow Feeder “iFEED”
  • PVC board “FunkiFlex”

We are looking forward to seeing you at our stand.

Feb 18.2013 
We shall exhibit at the Ritchell Corporation booth in the “Pittcon conference & expo 2013”
オフィシャルページへのリンクWe shall exhibit our Microfluidics chips at the “Richell Corporation booth” in Pittcon conference & expo 2013 which will be held during 18th (Mon) to 21st (Thu) of March, 2013.

Here are the details


[Details]
Date <Symposium, Presentation> 17th (Sun) to 21st (Thu) of March, 2013
<Exhibition> 18th (Mon) to 21st (Thu) of March, 2013
Venue Pennsylvania Convention Center (Philadelphia, PA, USA)
Contents Microfluidics chips : Electrophoresis, Flow, Fluid behavior (Fluid control experiment) etc.

Please drop by the booth if you intend to visit the conference.

Feb 13.2013 
We shall exhibit at "FOODEX JAPAN 2013 - The 38th International Food and Beverage Exhibition" !
We shall exhibit at "FOODEX JAPAN 2013 - The 38th International Food and Beverage Exhibition", which will be held between the 5th -8th of March.
Here are the details.

This time, we will introduce new food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth no. 6E-32. It's close to the entrance of Hall 6!

Contact Us
TEL)+81-044-853-2611 (Main)
FAX)+81-044-854-1979
KYODO INTERNATIONAL INC.
2-10-9 Miyazaki,
Miyamae-ku, Kawasaki-shi,
Kanagawa-ken, 216-0033,
Japan
Back to Top

Biotechnology

[Devices and Reagents for Bioresearch]

  • Nucleic Acid
  • Cell Cultivation / Imaging
  • Protein, Organic

[Biotechnology applied products]

KYODO INTERNATIONAL INC.
2-10-9 Miyazaki,
Miyamae-ku, Kawasaki-shi,
Kanagawa-ken, 216-0033,
Japan
TEL)+81-044-853-2611 (Main)
FAX)+81-044-854-1979
Contact Us
Copyright © KYODO INTERNATIONAL,INC.
all rights reserved.
Company logos and product names on this website
are registered or unregistered trademark.
Contact us for request of usage of illustrations,
photos and copies on this website.